SDS

up and explosion when exposed to extreme heat. Wear goggles and use self-contained breathing apparatus . If water is
used, fog nozzles are preferred.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment, and emergency procedures: Avoid breathing vapors. Ventilate area.
Remove all sources of ignition.
Methods and materials for containment and cleaning up: Clean up with absorbent material and place in closed
containers for disposal.
7. HANDLING AND STORAGE
Precautions for safe handling: Keep closure tight and container upright to prevent leakage. Follow usage directions. Do
not get in eyes. Avoid skin contact and contact with clothing. Do not take internally.
Conditions for safe storage, including any incompatibilities: Store and use in cool, dry, well-ventilated areas. Keep
containers closed when not in use. Keep away from excessive heat.
8. EXPOSURE CONTROL/PERSONAL PROTECTION
Appropriate engineering controls: Ventilation should be sufficient to prevent inhalation of any vapors .
Individual protection measures:
Respiratory protection: None under normal use. Avoid breathing vapors. In restricted areas , use approved
chemical/mechanical filters designed to remove a combination of particles and vapor. In confined areas, use an approved air
line respirator or hood. Self-contained breathing apparatus is required for vapor concentrations above PEL/TLV limits .
Protective gloves: None under normal use. Use solvent-resistant for prolonged or repeated contact.
Eye protection: None under normal use. However, use of safety glasses with splash guards or full face shield should be
used if indicated.
Other protective clothing or equipment: None under normal use. However, use of solvent-resistant aprons or other
clothing is recommended. Eye washes and safety showers in the workplace are recommended.
9. PHYSICAL AND CHEMICAL PROPERTIES
SDS for: AH30940
Page 2 of 3
Printed: 4/25/2019