Instructions / Assembly

QUICK START GUIDE

GETTING STARTED

Insert handle into main unit.

You will hear a click when

inserted properly.

Insert the battery until it clicks.

Ensure battery is fully charged

before starting.

Install the brush roll cover

according to instructions on

brush roll cover.

1 2

FILLING THE TANK

Remove solution tank from

your product.

Close the ﬂap and reinsert

tank until it clicks into place.

First, open the ﬂap and ﬁll with

water to the WATER line. Next,

ﬁll Hoover Solution to SOLUTION

ﬁll line.

1 2

SOLUTION

WATER

CLICK

QUICK START GUIDE

ONEPWR

SMARTWASH

™

CORDLESS CARPET CLEANER

PAGE 1
ONEPWR SMARTWASH ™ ® CORDLESS CARPET CLEANER QUICK START GUIDE GETTING STARTED 1 CLICK Insert handle into main unit. You will hear a click when inserted properly. CLICK 2 3 Install the brush roll cover according to instructions on brush roll cover. Insert the battery until it clicks. Ensure battery is fully charged before starting. FILLING THE TANK SOLUTION WATER 1 2 3 Remove solution tank from your product. First, open the ﬂap and ﬁll with water to the WATER line.
PAGE 2
HOW TO USE 1 2 3 Step on the Handle Release Pedal to recline the unit into cleaning position. Locate and push the power button on the handle to start your machine. Use the + and - buttons to switch between AUTO, SPOT, and DRY ONLY modes. SPOT MODE Toggle to SPOT Mode for heavy messes and stubborn stains. DRY ONLY MODE Used to remove any remaining moisture in the carpet. USE MODES WASH DRY AUTO MODE Slowly push forward and the machine will automatically dispense water and solution.