Manual

Unplug deep cleaner from electrical outlet.
_/ Place handle in upright position.
,/ The hose and tool caddy can be removed from the
cleaner if you desire.
_/ Remove hose from tool caddy.
_/ Open hose door (A) on back of deep cleaner (Fig. 13).
,/ Align hose connector with hose and solution ports (C)
(Fig. 14).
,/ Push hose into port and lock in place.
_/ To remove hose: Squeeze latches (D) on top and bottom
of hose. Remove hose from port (Fig. 15).
_/ Close hose door (A) tightly (inset).
f Z
Select tool
SpinScrub TM hand tool
• Rotating brushes
• Use on carpet to clean
spots, small areas or
stairs
)
Stair/Upholstery nozzle
• Built-in brush
• Use on upholstery
Unplug deep cleaner from electrical outlet.
,/ Slide tool onto hose. Snap tool over tab (E) on hose (Fig 18).
_/ To remove tool: Push forward and up on latch (F) (Fig. 19).
Slide tool off hose.
E
Continued _ 7