Use and Care Manual

18
BRUSHROLL PART #: 440012796 – TO BUY, VISIT HOOVER.COM
Slip brushroll through belt.
Replace belt cover and secure by
replacing all 6 screws.
1
3
2
With belt in place, pull and slide
brushroll into unit, making sure that
the brushroll end caps are in correct
orientation.
Maintenance
How to Remove and Clean Brushroll
HOW TO REPLACE
LUBRICATION
The motor is equipped with bearings that contain sucient lubrication for the
life of the motor.
The addition of lubricant could cause damage. Therefore, do not add lubricant
to motor bearings.
*in front of wheel
IMPORTANT
Rotate brushrolls manually to make sure belt is not twisted or pinched.
! !
CAUTION
To reduce the risk of injury from moving parts, unplug before servicing.
! !
STORAGE
Before storing: Empty Clean Water Tank and let air dry. Replace on cleaner.
Empty Dirty Water Tank, rinse tank and lid thoroughly with clean water and let
air dry.
Allow brushes and underside of carpet cleaner to air dry thouroughly before
storing carpet cleaner on a carpeted or wood surface.