User's Manual
Table Of Contents
- SAFETY INFORMATION
- COMBI REFRIGERATOR HOOVER
- TRANSPORTATION INSTRUCTIONS
- INSTALLATION INSTRUCTIONS
- STARTING TO USE
- COMBI OPERATION
- Appliance connected to power at the first time: When the appliance is connected to power at the first time, the display will be lit for 2 seconds before going normal and the appliance runs with intelligence function. Display Control: When the refriger...
- VERTICAL DISPLAY (if present)
- TOP FEAUTRED VERTICAL DISPLAY (if present)
- SETTING Button: Press “SETTING” to change the temperature. When button is pressed for the first time: You can change refrigerator temperature with ▲ PLUS Button and ▼ MINUS Button.
- When button is pressed for the second time: You can change refrigerator temperature with ▲ PLUS Button and ▼ MINUS Button.
- ON/OFF Button: To turn on Refrigerator Press ON/OFF button for 3 seconds. To turn off Refrigerator: Press ON/Off button for 3 seconds.
- Stand-by Mode: To save energy is possible to activate Stanby Mode. The refrigerator will work in normal state and all leds will turn OFF To enter Stan-by Mode: Press ON/OFF button for 1 second. To deactivate Stan-by Mode: Press ON/OFF button for 1 sec...
- HOLIDAY Button: In case of long stops, the Holiday function can be used. This function deactivates the fridge compartment, while leaving the freezer on. Ensure that there is no food inside the fridge compartment before using this function. The functio...
- INTERNAL USER INTERFACE (if present)
- TECHNICAL FEATURES
- ENERGY SAVING
- TAKE CARE
- CHANGING THE INTERNAL LIGHT
- REVERSING THE DOOR SWING
- TROUBLE SHOOTING
FAST COOLING: Activate Fast Cooling mode to start an additional pulse for a fast freezing of the
fridge compartment. The function is activated and confirmed by the switching on of the dedicated
LED icon.
To enter Fast Cooling: Click “option” until it flickers in “Fast Cooling” and then click “OK” to enter
this function.
To deactivate Fast Cooling: Click “option” until it goes to “fast cooling” and then click “OK” to
deactivate this function.
FAST FREEZING: Activate Fast Freezing to rapidly freeze big quantities of food keeping intact
nutritional food properties. When the light in Fast Freezing goes off and the freezer temperature
goes back to the value before fast freezing. When Fast Freezing time is up (26 hours), it deactivates
automatically. When it goes to Vacation, Fast Freezing stops.
To enter Fast Freezing: Click “option” until it flickers in “Fast Freezing” and then click “OK” to enter
this function.
To deactivate Fast Freezing: Click “option” until it goes to “fast freezing” and then click “OK” to quit
this function.
VACATION: In case of long stops, the Vacation function can be used. This function deactivates the
fridge compartment, while leaving the freezer on. Ensure that there is no food inside the fridge
compartment before using this function. The function is activated and confirmed by the switching
on of the dedicated LED icon. The light in Vacation goes off and the refrigerator temperature goes
back to the value before Vacation.
Vacation quits under functions of Smart ECO and Fast Cooling.
To enter Vacation: Click “option” until it flickers in “Fast Freezing” and then click “OK” to enter this
function.
To deactivate Vacation: Click “option” until it goes to “Vacation” and then click “OK” to quit this
function.
POWER OFF MEMORY: Refrigerator can automatically keep all the setting in case of power off.
When the unit is plugged in again, the refrigerator will run with the setting before power off.
POWER-ON DELAY: To prevent harm to the refrigerator in case of sudden power cut and power on,
the unit does not start immediately if the power off time is less than 5 minutes.
FREEZER OVER-TEMPERATURE ALARM (only in case of power on): When the freezer temperature is
higher than 10°C at the first time connected to power, the symbol light of the freezer chamber goes
on and the number representing temperature flickers.
Press any button or wait for 5 seconds, flickering stops and it goes back to the temperature that was
set.
REFRIGERATOR DOOR OPENING ALARM: When the refrigerator is open over 3 minutes, the buzzer
will buzz. Close the door or press any button to stop the alarm, but for the latter, the alarm will go
off again after 3 minutes.
SENSOR FAULT ALARM: When it shows “E0”, “E1”, “E2” or other abnormal symbols, it means sensor
faults and the refrigerator needs repair.