User's Manual
Table Of Contents
- SAFETY INFORMATION
- COMBI REFRIGERATOR HOOVER
- TRANSPORTATION INSTRUCTIONS
- INSTALLATION INSTRUCTIONS
- STARTING TO USE
- COMBI OPERATION
- Appliance connected to power at the first time: When the appliance is connected to power at the first time, the display will be lit for 2 seconds before going normal and the appliance runs with intelligence function. Display Control: When the refriger...
- VERTICAL DISPLAY (if present)
- TOP FEAUTRED VERTICAL DISPLAY (if present)
- SETTING Button: Press “SETTING” to change the temperature. When button is pressed for the first time: You can change refrigerator temperature with ▲ PLUS Button and ▼ MINUS Button.
- When button is pressed for the second time: You can change refrigerator temperature with ▲ PLUS Button and ▼ MINUS Button.
- ON/OFF Button: To turn on Refrigerator Press ON/OFF button for 3 seconds. To turn off Refrigerator: Press ON/Off button for 3 seconds.
- Stand-by Mode: To save energy is possible to activate Stanby Mode. The refrigerator will work in normal state and all leds will turn OFF To enter Stan-by Mode: Press ON/OFF button for 1 second. To deactivate Stan-by Mode: Press ON/OFF button for 1 sec...
- HOLIDAY Button: In case of long stops, the Holiday function can be used. This function deactivates the fridge compartment, while leaving the freezer on. Ensure that there is no food inside the fridge compartment before using this function. The functio...
- INTERNAL USER INTERFACE (if present)
- TECHNICAL FEATURES
- ENERGY SAVING
- TAKE CARE
- CHANGING THE INTERNAL LIGHT
- REVERSING THE DOOR SWING
- TROUBLE SHOOTING
3. Put on the refrigerator door and assemble the upper hinge to the
other side of the cabinet; use a tool to screw up the 4 screws to fix
the upper hinge.
After that, connect the door communication line and the cabinet communication line and
then put on the upper hinge cover and fix it using a screw.
4. Assemble the hole cover to the other side of the cabinet and use a tool to screw up the hole
cover.
Door disassembly is finished here.
figure of door opening from the right
figure of door opening from the left
NOTE: If you want to have the door swing reversed, we recommend that your contact a qualified
technician. You should only try to reverse the door yourself if you believe that you are qualified to
do so. All parts removed must be saved to do the reinstallation of the door. You should rest the
fridge freezer on something solid so that it will not slip during the door change process. Do not lay
the fridge freezer flat as this may damage the coolant system. Ensure the fridge freezer is unplugged
and empty. We recommend that 2 people handle the fridge freezer during assembly.
The pictures are for illustrative purposes only.