User Manual

17
Attentions:
1. If the cleaning solution is used for cleaning water dispenser, then it is suggested that,
before the water taking and drinking, the water shall be drained to the amount of 5-6 cups
after the water tank is installed back, so as to avoid the residue cleaning solution.
III. Installation
1. Installation of water valve components
The guiding boss on the water valve components shall be in alignment with the guiding slot
on the base, and press it down in the direction of in the direction of 45°of oblique downward
by hands with strength, until you may hear the sound of “lick”.
2. Installation of water tank sealing ring
To install the sealing ring on the bottom of water tank by hand, make sure that it is properly
installed, and the wrinkling and oblique installation and so on
shall be avoided.
3. Installation of water tank components
The hanging slot on the water tank components shall be in alignment with the suspension
loop on the inner layer, and the sealing ring at the bottom of water tank shall be in alignment
with the entrance of water value components, and then insert them into the corresponding
positions in the direction of 45° of oblique downward by hands.
Cleaning of water receiving tank
Use wet cloth to wipe it and then use the dry cloth.