Operation Manual

6 - 7 -

7 -

Select the temperature of the soleplate by turning the dial (10) on the iron to the

desired position. Wait a few moments until the temperature indicator (13) is o. It

will indicate to you that the soleplate has reached the requested temperature.

While ironing, the temperature dial indicator may turn on and o, the temperature

adjusts without interrupting your ironing.

Help

Check the laundry care label of the garment to select the best temperature for each

textile. Please note that during use, the temperature light goes on from time to time.

It signies that the iron is heating up to the set temperature. If your garment is made

with various kinds of bers always select the soleplate temperature to reect the most

delicate fabric.

If the temperature is too low, some drops of water could escape from the soleplate.

Please raise up the temperature above the 2 dots (••) to avoid this issue.

Chapter 3: Using Your Steam Generator

N.B.

The rst time the appliance is used, you may nd some fumes and a noticeable

smell appear. This is quite normal and will disappear quickly.

Chapter 3.2 - Ironing

Dry Ironing

Domestic Iron Models:

Select the temperature of the soleplate following the indications of chapter 3.1.

When the soleplate reaches the required temperature, start your ironing without

pressing the steam trigger (11).

Professional Iron Models:

Only turn on the iron switch (1d). Select the temperature of the soleplate following

the instructions in chapter 3.1. Start your ironing when the soleplate reaches the

appropriate temperature.

Steam Ironing

Select the temperature of the soleplate following the instructions in chapter 3.1. On

the stand, when the steam function is ready, the dedicated lamp (1d) will turn o.

Starting from that time you can begin your ironing and press the steam trigger (11).

The steam ow stops when you release the trigger.

You have the possibility to regulate the steam ow with the Multi Steam Technology

selector (12). In order to achieve the best results, please refer to the dedicated

chapter 3.3 for more information.

Ironspeed_SF__1-12_union.indd 6 19-10-2009 17:57:53