Hoover. Owner's Manual English = pp. 1-11 ™ Lifespan =» Wind Tunnel Canister Cleaner Francis =* with Powered Nozzle Wind Tunnel’ v4 Review this manual before operating cleaner. www.hoovercompany.
Fill in and retain Teri model and serial bumper sre located on the bottom of the cleaner For your personal records, pi the spaces provide Your cleaner is model o enter the COMPLETE model and serial number in and retain this information, al number, and has It is suggested that you attach your sales receipt to this owner's manual. Verification of date of purchase may be required for warranty service of your Hoover production. Index Assembling Clearer... Cleaner Des Hee Too Use Canister Cleaner...
EE es Ti saner was in acted and packaged carefully before being shipped from the factory. If you should happen to ends assistance during assembly or operation, call 1-800-944-8200 ror an automated referral of authorized service outlet locations (U.S. only) OR 1-330-499-9499 0 speak with a representative in the Hoover Consumer Response Center. OR Visit us online at WWW.HOOVErCOMPAany.com to dint the service outset ne Carton contents you {click on the "Service" button).
Attach second wand to the first. Position To attach the hose to the extension Push plug on power nozzle cord com card into cord chips on wands, clap. wands, push latch (F) on the hand grin platelet into receptacle underneath ing xcs God between nozzle and 16 the unlock § symbol. hand grip. baton cord Clip.
Polarized plug Ta reduce the risk of electric shack, this appliance has a polarized plug {one blade is wider than the athwart. This Plug will fit in a polarized outlet only one: way. lf the plug does not He fully in the il do alibied electrician to cutlet! reverse the plug. tits not fit, compact & install the proper outset. Do not change the plug in any way, rE \ ON-OFF switches Amer assembling cleaner, plug card into electrical outlet, Turn cleaner on by depressing ON-OFF peat (A).
\ \ F Hard sure @ tho or © Tho parer nonwhite ot wood, linoleum, vinyl, asphalt and rub: ber tile Faze, os well as carpet floors such as nine hard surface sealed cork, concrete and te To set the power nozzle for ard surface floor cleaning, push the floor surface selector button toward "BARE" (E). This setting provides suction and fo agitator stein. I you prefer, you may use the. floorwalker brush to clean bare floors.
How to connect To use the cleaner with tots, disconnect the pow nozzle from the hand grip Tools may be attached directly to the hand grip.
ruefully pull out used bag Form new hag into a bx-tike shape. Tide ag collar firmly into holder, Pus rear edge sar bag opening (B) by pushing the Gg into bag cavity below § Ci pierces paper through opening toward bag interior Cl's bag lig. How to attach bag tid The tag lid and hinges are designed with a "breakaway” feature. I the tid is pushed open tao far, it will come off.
How to replace Rewrite nozzle wo original position and lif off goad Remove brush roll cover {C) by remove Disconnect cleaner from electrical ing the 3 Philips head screws. outlet and disconnect power nozzle from extension wands. Teo remove hove, turn nozzle over and unscrew the 4 recessed Phillips deaf so sirs Note: Do not remove the 3 screws in the triangle formation as these hold the motor in place.
Agitator brush rol replacement When to replace Disconnect cleaner from electrical outlet. Wren agitator brush roll brushes ar worn, the brash roll should be replaced To check condition of brushes, move age of a card across Bolton plate white turning brush roll. Jo maintain c effectiveness os Gn Pot oL nine replace brush roll if brush a What to buy Wren purchasing a new agitator brush roll, ask far HOOVER part no, 48414071. How to replace Disconnect cleaner from electrical out. fet. 1.
ERNIE problem It a minor problem occurs, it us fe solved quite easily when the found by using the check ist below. Problem: Cleaner won't run Possible cause Possible solution * Not “ON"at cleaner. * Turn "ON" at cleaner. = Not “ON”at hand grip. * Tur "ON at hand grip. * Not firmly plugged in. * Plug unit in firstly, » No voltage in wall plug. * Neck fuse of brake. * Blown fuse or tripped breaker. * Replace tus Problem: Cleaner suction low Possible cause Possible solution Bag full. Replace paper bag.
HOOVER y maracas registrars HOOVER at Hos marques deposes THE HOOVER COMPANY, NORTH CANTON, OHIO 44720 HOOVER CANADA, BURLINGTON, ONTARIO L7R 4A8 HOOVER ana registered trademarks THE HOOVER COMPANY, NORTH CANTON, OHIO 44720 R1 4-99 S3630/46/55 Li tho USA 56513349