HHI 694 Montage- und Gebrauchsanweisung Instruction on mounting and use Prescriptions de montage et mode d’emploi Istruzioni di montaggio e d'uso Montaje y modo de empleo Instruções para montagem e utilização
Instruction on mounting and use Consult the designs in the front pages referenced in the text by alphabet letters. Closely follow the instructions set out in this manual. All responsibility, for any eventual inconveniences, damages or fires caused by not complying with the instructions in this manual, is declined. wall/ceiling. The wall/ceiling must be strong enough to take the weight of the hood. Do not tile, grout or silicone this appliance to the wall. Surface mounting only.
6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. is central with respect to the motor housing. Filtering version only: install a section of a tube, long enough to reach the connection ring on the motor housing (Fig.1), onto the F deflector. Mount motor housing J (Fig. 1) to the lattice girder with 4 large S screws (Fig. 3) so that the side with the electronic and connection boxes are on the front part. Connect the discharge tube. Fix bracket K (Fig. 3-Fig. 4-Fig. 4.
Only use halogen bulbs of 20W max (G4), making sure you do not touch them with your hands. 3. Refit the lamp cover. If the lights do not work, make sure that the lamps are fitted properly into their housings before you call for technical assistance. Maintenance Before performing any maintenance operation, isolate the hood from the electrical supply by switching off at the connector and removing the connector fuse.
