User Instructions

31
EN
● Ensure that the water inlet tap is turned on.
● And that the discharge tube is in place.
PROGRAMME SELECTION
Switch on the appliance by the ON/OFF button
Select the required programme
The display will show the settings for the programme selected.
Adjust the wash temperature if necessary.
Press the option buttons (if required)
Then press the START button.
When the START button is pressed the machine sets the
working sequence in motion.
Warning: If there is any break in the power supply while the
machine is operating, a special memory stores the selected
programme and,when the power is restored, it continues
where it left off.
● When the programme has ended the word “End” will
appear on the display
● Wait for the door lock to be released (about 2 minutes after
the programme has finished).
● Switch off the appliance by pressing the ON/OFF button
● Open the door and remove the laundry.
● Turn off the water supply after every use.
FOR ALL TYPES OF WASH CONSULT THE PROGRAMME
TABLE AND FOLLOW THE OPERATIONS IN THE ORDER
INDICATED.
30
EN
WASHING
VARIABLE CAPACITY
This washing machine automatically adapts the level of the water
to the type and quantity of washing.In this way it is also possible to
obtain a “personalized” wash from an energy saving point of view.
This system gives a decrease in energy consumption and a
sensible reduction in washing times.
EXAMPLE:
A net bag should be used for particularly delicate fabrics.
Let us suppose that the washing consists of HEAVILY SOILED
COTTON (tough stains should be removed with suitable stain
removal).
It is advisable not to wash a load made up entirely of articles
in towelling fabric which absorb a lot of water and become
too heavy.
● Open the detergent drawer.
● Put 120 g in the main wash compartment marked 2.
● Put 50 ml of the desired additive in the additives
compartment
✿✿
.
● Close the detergent drawer.