Manual

ACCESSORYADAPTOR

• 5.6 Align the H0seJHandle Assembly (G) with

Accessopj Adaptor (H) on the end fitted with the

corresponding attachment, Accessory adaptor

can also be attached to the extension wand if

longer reach is needed.

• Slide the Accessory Adaptor over the Hose

Handle Assembly until you hear a click.

• UseAccessory Adaptor to attach various different

accessories depending on the task to be

performed.

• To attach accessories, fit accessory over nozzle

tip, aligning arrows on tip with arrows on

accessory (5.7). Rotate quarter turn clockwise

to lock,

• To disinfect and kill 99.9% of harmful bacteria,

use steam cleaner without tools and attachments,

• Fill the solution tank with the Hoover _ Multi-

Purpose Disinfectant as directed in "Removing and

Filling Solution Tank" section on page 7, Turn Clean

Control(qM) dial to HIGH. Hold steam nozzle 6-8"

from surface, Spray for 10 seconds and allow to sit

for 1 minute.

USING ON CARPET

• Attach Multi-Surfaca Micmfiber Pad. Plug in

and press the power button on the steamer.

• Place the steamer into the carpet glider (5,8),

• To recline the steamer place foot on floor

head and tilt handle (5,9).

• To produce steam squeeze the trigger (5.t0),

• Move the mop head slowly backwards and

forwards across the floor (5,1t) paying

particular attention to high traffic areas.

AFTER STEAMER USE / USING COOLING BASE

• After using mop head and to avoid damage to your floors, unplug and

place mop head in cooling base (5.12) until product cools, Once steamer

is cooled, remove steam pad and follow =how to clean" instructions in

Microfiber pad section on page 12 to avoid mold and mildew,