Manual

ATTACH HOSE/HANDLE ASSEMBLY
• Open steam port door to expose interface and
hold open, Insert hose connector (A) onto the
steam port interface (B) pressing firmly until you
hear a click sound (3.1).
• Pull on hose lightly to ensure hose is securely
connected.
I Release door.
FILLING CLEAN WATER TANK
i Place the appliance on a level platform. If you are
tilling the clean water tank when hot, see
"Refilling Water During Operation" instructions
(pg. 8).
• Unscrew the water fill safety cap counter-
clockwise (4.1), and insert funnel.
• Add 1.1L (37oz) of dean water (fill measuring
cup to 550ml (18.50z) twice) and pour the water
into the tank (4,2). (Max. capacity of the tank is
1.1L (37oz). Do not overfill the tank, allow space
to be left at the top).
| Re-install the water t_l]safety cap in a clockwise
direction and tighten until completely sealed.