Manual

ATTACHING ACCESSORIES
EXTENSION WAND SECTIONS
• Align Extension Wand (A) with hose handle
(B) (5._,). Connect the wand with the rotating
cord hook first to the hose and handle assembly.
• Press Extension Wand with the rotating cord
hook against the hose handle until you hear
a click.
• Repeat this p_ocedure if it is necessary to attach
more wands. The fixed hook extension wand will
be last to be attached (closest to the accessory
or mop head).
• Use ExtensionWands
to increase the distance
from HoselHandle
Assembly to the chosen
accessory (mop head,
grout tool, etc.)
ATTACHING MOP HEAD
• 5.2 Align Extension Wand (C) with the opening on the Mop Head (D), at the
corresponding end,
• Press Extension 'Wand against the Mop Head until you hear a click.
=' Use Mop Head to clean sealed hard floors and carpets. Pad must be
attached. Reference section "Attaching the Microflber Pads" to ensure
correct pad is being used.
I Mop head can also be connected directly to the hoselhandle assembly.
ATTACHING THE MICROFIBER PADS
ForGeneralCleaning
ii Use the "Multi-Surface Microfiber Pad" (5.3).
II Place the "Multi-Surface Microfiber Pad" on
the floor (white side up).
i Place the product on top of the pad making
sure the mop head covers the entire pad
(5.3). Hook and loop feature on the bottom
of the mop head will hold the pad in place.
ForDisinfecting
• To disinfect and kill or remove 99.9% of
harmful bacteria, use the "Hard Floor Microfiber
Pad", which contains the cut outs in it (5.4).
• Place the "Hard Floor Microflber Pad" on
the floor (white side up).
• Follow directions For General Cleaning.
• Fill the solution tank with the HooveP Multi-
Purpose Disinfectant as directed in "Removing
and Filling Solution Tank" section on page 7. Turn
Clean Control dial to HIGH,
• Run a minimum of 4 strokes at a medium pace
across same area and allow to air dry.