Installation Instructions

6 7
ASSEMBLY STEP 1
A Open hardware bag 1.
B Cut the yellow banding and get console mast
out
C Attach the LeFT SOCKeT to the LeFT
COnSOLe maST using 4 SOCKeT bOLTS
(a).
D Attach the rIghT SOCKeT to the rIghT
COnSOLe maST using 4 SOCKeT bOLTS
(a).
SOCKET BOLT
10 mm
Qty: 8
HARDWARE BAG 1 CONTENTS :
SOCKET BOLT
CONSOLE MAST
SOCKET
ALL
MoDELS
ALL
MoDELS
ASSEMBLY STEP 2
A Lift the runnIng deCK upward until the
FOOT LaTCh locks. Remove all contents from
underneath the running deck.
B Open hardware bag 2.
C With the runnIng deCK in the raised
position, attach the LeFT COnSOLe maST
to the baSe Frame using 4 bOLTS (a),
4 SprIng waSherS (b) and 4 FLaT
waSherS (C).
BOLT (A)
20 mm
Qty: 4
SPRING WASHER (B)
15 mm
Qty: 4
FLAT WASHER (C)
15 mm
Qty: 4
HARDWARE BAG 2 CONTENTS :
LEFT
CONSOLE
MAST
RUNNING DECK
BASE FRAME
FOOT LATCH
BOLTS (A)
SPRING WASHERS (B)
FLAT WASHERS (C)