Installation Instructions

8 9
ASSEMBLY STEP 3
A Open hardware bag 3.
B Pull Lead wIre through rIghT COnSOLe
maST. After pulling the lead wire through the
mast, the top of the COnSOLe CabLe should
be located at the top of the mast. Detach and
discard the lead wire.
C With the runnIng deCK in the raised
position, attach the rIghT COnSOLe
maST to the baSe Frame using 4 bOLTS
(a), 4 SprIng waSherS (b) and 4 FLaT
waSherS (C).
NOTE: Be careful not to pinch any wires
while assembling the right console mast.
BOLT (A)
20 mm
Qty: 4
SPRING WASHER (B)
15 mm
Qty: 4
FLAT WASHER (C)
15 mm
Qty: 4
HARDWARE BAG 3 CONTENTS :
BOLTS (A)
SPRING WASHERS (B)
FLAT WASHERS (C)
RIGHT CONSOLE MAST
CONSOLE CABLE
LEAD WIRE
CONSOLE CABLE
BASE FRAME
RUNNING DECK
ALL
MoDELS
ALL
MoDELS
ASSEMBLY STEP 4
SPRING WASHER (B)
15 mm
Qty: 6
FLAT WASHER (C)
15 mm
Qty: 6
BOLT (D)
15 mm
Qty: 6
HARDWARE BAG 4 CONTENTS :
FLAT WASHERS (C)
CONSOLE MAST
CONSOLE CABLES
SPRING WASHERS (B)
BOLTS (D)
CONSOLE
ASSEMBLE
LEFT SIDE
FIRST
A Disengage the deCK LOCK LaTCh with your
foot to lower the runnIng deCK.
B Open hardware bag 4.
C Gently place the COnSOLe on top of the
COnSOLe maSTS. Attach the LeFT SIde first
using 2 bOLTS (d), 2 SprIng waSherS (b)
and 2 FLaT waSherS (C).
D Connect the COnSOLe CabLeS, carefully
tucking wires in masts to avoid damage.
E Attach the rIghT SIde of the COnSOLe
using 2 bOLTS (d), 2 SprIng waSherS
(b) and 2 FLaT waSherS (C).
NOTE: Be careful not to pinch any wires
while assembling the masts.