Operating Instructions and Installation Instructions

6 7
ASSEMBLY Step 1 ASSEMBLY Step 2
Andes6
Andes8
Andes6
Andes8
A
Use HEXAGON L WRENCH #5 to remove
PRE-AttACHEd WASHERS (A) & SCREWS
(A) from frame.
B Put CONSOLE WIRES through CONSOLE
MASt.
C Set CONSOLE MASt on the frame.
D Use HEXAGON L WRENCH #5 to
attach CONSOLE MASt to frame with
PRE-AttACHEd WASHERS (A) & SCREWS
(A).
E Use HEXAGON L WRENCH #5 to remove
PRE-AttACHEd SCREWS (B) from frame.
F Then use HEXAGON L WRENCH #5 to
attach CONSOLE MASt COVERS with
PRE-AttACHEd SCREWS (B).
SCREW (A)
M8 x 1.25P x 16 L
Qty: 4
WASHER (A)
φ8.4 xφ17.0 x 1.0T
Qty: 4
SCREW (B)
M4 x 0.75P x 12L
Qty: 2
HEXAGON L
WRENCH #5
(W/SCREW DRIVER)
pre-attacHeD HarDWare partS:
CONSOLE WIRES
REAR CONSOLE
MAST COVER
WASHERS (A)
SCREW(A)
SCREW(B)
FRONT CONSOLE
MAST COVER
CONSOLE MAST
CONSOLE WIRES
CONSOLE MAST
SCREW(C)
CONSOLE
A Use HEXAGON L WRENCH #5 to remove
PRE-AttACHEd SCREW (C) from CONSOLE.
B Attach CONSOLE WIRES to CONSOLE.
C Use HEXAGON L WRENCH #5 to attach
CONSOLE to CONSOLE MASt with PRE-
AttACHEd SCREW (C).
SCREW (C)
M5 x 0.8P x 12L
Qty: 4
HEXAGON L
WRENCH #5
(W/SCREW DRIVER)
pre-attacHeD HarDWare partS:
REAR CONSOLE
MAST COVER
EP247-Q09
FRONT CONSOLE
MAST COVER
EP247-Q10