Instruction Manual
42
III. Maintenance
The appliance must be maintained in accordance with the instruction manual and labels
provided. Consult with your local Hoshizaki Certied Service Representative about
maintenance service.
WARNING
• Only qualied service technicians should service the appliance.
• To reduce the risk of electric shock, do not touch the icemaker power switch or
control switch with damp hands.
• Before Servicing: Move the icemaker's power switch to the "OFF" position. Turn off
the power supply. Place the disconnect (if applicable) in the off position.
Lockout/Tagout to prevent the power supply from being turned back on
inadvertently.
• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are
securely in place after any maintenance is done to the appliance. Make sure that
none have fallen into the dispenser unit/ice storage bin.
Fig. 20
Spout
Chute
Packing
Chute Insulation
Extruding Head
Evaporator
Assembly
Reservoir
Ties
(Hook and Loop)
Float Switch
Rubber O-Ring
(F-650 and Larger)
Nylon Ring
(F-650 and Larger)
Evaporator
Condensate
Drain Pan
Infrared Sensor Lens
Evaporator Packing
(F-450 Only)
Upper Spout Strap
Spout-to-Chute Packing
Spout-to-Chute Bracket
(F/FD-1002 and Smaller)
Lower Spout Strap
Reservoir Hose
Overow Hose
Reservoir
Cover
Drip Guide
(F-1501M_J(_C) and F-2002M_J(-C) )