Owner's manual

g) Move the power switch to the "OFF" position, then turn off the power supply.

h) Replace the chute assembly and strap in their correct positions.

i) Move the power switch to the "ON" position.

j) Replace the top and front panels in their correct positions.

7) Pour warm water into the storage bin and melt any remaining ice. Clean the storage bin

liner using a neutral cleaner. Rinse thoroughly after cleaning. WARNING! CHOKING

HAZARD: Ensure all components, fasteners, and thumbscrews are securely in

place. Make sure that none have fallen into the storage bin.

8) Turn on the power supply to start the automatic icemaking process.