Specifications Sheet

Modular Ice Machine
Item #:
Project:
Qty:
AIA#:
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
Cube Dimensions*
* approximate size in inches, image not to scale
Features
• Flaker - Up to 1705 lbs. of ice production per
24 hours
• Cubelet - Up to 1376 lbs. of ice production per
24 hours
• Mount two units, side-by-side, in only 60” of floor
space for double the amount of ice production
• 2 second flush cycle every hour
• Flush cycle removes sediment for cleaner ice
• Infrared bin control for easy cleaning and reliability
• R-404A Refrigerant
Durable stainless steel exterior
Advanced CleanCycle24
TM
design
Stainless steel auger with greaseless
bearing
Available on Bins:
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 187-253V
Operating Limits
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe
or Equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)
• Condenser Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Condenser Drain/Return Line: Minimum 1/4” Nominal ID
Hard Pipe (open drain system) or Copper Water Tubing
(closed loop system) or Equivalent
Plumbing
• Panels easily removed and all components
accessible for service.
• Removable/cleanable air filter (Air-cooled model only)
• Allow 6” (15 cm) clearance at rear and sides, and 24”
(61 cm) clearance at top for proper air circulation and
ease of maintenance/service.
Service
W x D x H
Hoshizaki reserves the right to change specifications without notice.
Printed in the U.S.A.
3 Year Parts & Labor on entire machine. 5 Year Parts on Compressor; air-cooled
condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories.
Contact factory for warranty in other countries.
Warranty:
F-1501M_J(-C)
F-1501M_J(-C)
01/26/18
Item # 13339
Slim-Line Series
Water-Cooled Cubelet
F-1501MWJ-C
1/2”
1/2”
3/4”
3/4”
Top kit may be required. See Bin Spec Sheets.
B-1300SS
B-1500SS
B-250PF
B-500PF/SF
B-900PF/SF
B-1150SS
B-1650SS
1”
Flaked Cubelet
F-1501M_J F-1501M_J-C
TM
30" x 27
3/8
" x 34
7/16
"
F-1501MWJ
Water-Cooled Flaker
B-700PF/SF
B-800PF/SF
Air-Cooled Cubelet
F-1501MAJ-C
F-1501MAJ
Air-Cooled Flaker
Shown on optional bin B-900
F-1501MRJ
Remote Air-Cooled Flaker
Remote Air-Cooled Cubelet
F-1501MRJ-C
Air / Water Temp
Lbs. per 24 hours
Condenser
Model
70°/ 50°F 90°/ 70°F
ICE PRODUCTION
Potable
Gal. per 100 lbs.
Condenser
Gal. per 100 lbs.
Max. Fuse Size
or HACR
Circuit Breaker
Heat
Rejection
BTU/hr.
Voltage
WATER USAGE
90°/ 70°F 90°/ 70°F
ELECTRICAL*
90°/ 70°F
kWh Used
per 100 lbs.
Amperage
1543
1624
1705
F-1501MAJ
F-1501MWJ
F-1501MRJ
1154
1410
1370
Air
Water
Remote
F-1501MAJ-C
F-1501MWJ-C
F-1501MRJ-C
Air
Water
Remote
1327
1376
1335
1020
1218
1125
12.0
12.0
12.0
N/A
123
N/A
N/A
105
N/A
4.61
3.76
4.35
4.00
3.20
3.44
20A
20A
20A
20A
20A
20A
15.A
15.4A
18.4A
15.9A
15.4A
18.4A
208-230/60/1
208-230/60/1
208-230/60/1
12,300
12,800
12,300
12,300
12,900
12,300
300 / 325
300 / 325
300 / 325
Ice machines must be hard-wired at site.
Circuit
Wires
(including ground)
Net / Ship
Weight (lbs.)
Refrigerant
Charge Amount
4
4
4
4
4
4
2 lbs. 5 oz.
1 lb. 4.5 oz.
4 lb. 6.5 oz.
12.0
12.0
12.0
300 / 325
300 / 325
300 / 325
2 lbs. 5 oz.
1 lb. 4.5 oz.
4 lb. 6.5 oz.
†
(with condenser)
9 lbs. 9 oz.
†
*If neutral is not available, transformer kit (HS-5030) is required. Refer to instruction manual for installation and electrical requirements.
208-230/60/1
208-230/60/1
208-230/60/1
9 lbs. 9 oz.
†
32” x 34
3/4
” x 40”
Shipping Dimensions