Specification Sheet

CRMR27-8D
Commercial Series Sandwich Top Refrigerator with Drawers
© HOSHIZAKI AMERICA, INC.
618 Hwy. 74 S., Peachtree City, GA 30269 • TEL [phone] • FAX [phone] • www.hoshizaki.com
CRMR27-8D
SIDE
(Cross Section)
CRMR27-8D
FRONT
3
0.7”
1
”
22.75”
4
5.2”
3
6”
6
”
CRMR27-8D
PLAN VIEW
2
7”
(8) - 1/6 Size Pan
Capacity
10” x 27” x 1/2” Thick
Cutting Board
Cabinet Construction
The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. Cabinet is provided with a stainless steel top enclosure and an easily
removable stainless steel insulated lift-up cover. The exterior back and bottom are constructed of coated steel. The cabinet interior back and sides are anodized
aluminum with an ABS ceiling and stainless steel floor. Cabinet walls and drawers are insulated with 2” of environmentally friendly, CFC free, foamed in place
polyurethane. 6” polyolefin, stem casters (two with brakes) are standard. Preparation tables are supplied with a 27” x 10” x ½” thick N.S.F. approved white
polyethylene cutting board.
Drawer Construction
Drawer fronts are constructed of high grade stainless steel inside with stainless steel interior liners and are insulated with R-134a CFC free foamed in place
polyurethane. Each drawer accommodates (1) 12" x 20" x 6" size pan per drawer (pans by others). Drawer frames are formed of 14 gauge stainless steel and
securely fastened in the cabinet. The drawer slides are constructed of heavy duty16 gauge stainless steel with durable acetal rollers with stainless steel ball bearings
to prevent metal to metal contact. The drawer slides have a dynamic load capacity of 175 lbs. and have been life tested (fully loaded) three hundred thousand
cycles without showing significant wear. The flush mount handles are constructed of extruded aluminum. Snap-in magnetic drawer gaskets are durable and easily
removed for cleaning.
Refrigeration System
Front breathing refrigeration system allows unit to be built in to any enclosure with zero side or rear clearance. The high efficiency refrigeration system is self-contained with
an enamel coated evaporator for extended life. Condensate removal is accomplished with an energy efficient non-electric evaporation system. A capillary tube controls the
flow of environmentally friendly R-134A refrigerant through the evaporator. Refrigeration system utilizes a heated defrost to eliminate any ice on the evaporator coil. An
innovative air distribution system distributes air evenly around the pans. Product temperatures are maintained between 33°F and 41°F at 86° ambient room temperature to
comply with N.S.F. 7. Preparation tables are supplied with a full complement of N.S.F. approved plastic 1⁄6 size pans, 4” deep and stainless steel adapter bars. Units will also
accommodate 6” deep pans. Pans are located 1.5” below the top to keep food product within easy reach. 115 volt units are equipped with an eight foot cord and NEMA
rated plug (20.0 amps or less).
1
3.2”
49.25”
1
9.6”
30”