User Guide

HotBrick, Tel: 305

398

0888, Fax: 305

398

5966

The screen is required in order to use multiple PPPoE sessions on the same WAN port. It

can also be used to manually connect or disconnect a PPPoE session.

Advanced WAN – PPPoE

Select WAN port & Session

WAN Port – Selected WAN port using the PPPoE connection

PPPoE Session – Usually the ISP provides multiple floating real IPs for PPPoE. Each WAN

port can have up to 8 PPPoE sessions with different IP addresses, if your WAN port is

using a PPPoE connection.

PPPoE Session MTU – The Maximum Transfer Unit for PPPoE packet data. Leave it

at the default, unless the ISP specifies a different PPPoE packet data size. The default

value of MTU is 1492 bytes.

WAN IP Account

User Name – Enter the PPPoE user name assigned by your ISP.



Password – Enter the PPPoE password assigned by your ISP.

Verify Password – Re-enter the PPPoE password assigned by your ISP.