Dual WAN Firewall Router User's Guide VPN 800

HotBrick Network Solutions
Page 9
7. Enter admin for the "User Name" and leave the "Password" blank.
• The "User Name" is always admin
• You can and should set a password, using the following Admin Password screen.
No Response?
• Is your PC using a Fixed IP address?
If so, you must configure your PC to use an IP address within the range 192.168.1.2 to
192.168.1.254, with a Network Mask of 255.255.255.0. See Appendix B – Windows
TCP/IP Setup for details.
• Check that the VPN 800/2 Firewall Router is properly installed, LAN connection is OK,
and it is powered ON.
8. After the login, you will then see the Admin Password screen, as shown below.
Assign a password by entering it in the "Password" and "Verify Fields.
Figure 2-2: Home Screen (Admin Password) VPN 800 /2