Instruction for Use

9
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
THE CONTROLS
Switch on the electricity supply to the cooker at the Cooker Control Unit.
Dual Circuit Oval
Hot
p
late control
Hob Controls
Main
Oven
Control
Timer
Top
Oven
Control
Grill
Control
Hob Controls
As each control knob is turned clockwise, numbers from 1 - 6 on the control knob
increase. Setting 6 is the highest/hottest and gives 100% power.
Setting 1 is the lowest/coolest and gives about 7% power.
Variable power is obtainable on each of the heating areas by selecting any number
between 1 & 6.
Right Front Control
This is to control a dual circuit oval hotplate with two elements. By turning the knob
clockwise both parts of the hotplate are switched on, numbers 1-4 on the control knob,
4 is the highest setting. With the knob turned anticlockwise, only the inner part of the
hotplate is switched on, this is also indicated by numbers 1-4 on the control knob, 4 is
the highest setting.
Variable power for either the whole or the inner part of the hotplate is obtained by
selecting any number between 1 & 4.
The off position is identified by an '0'.
The hob hot warning lights will operate soon after each of the heating areas have been
switched on. Each warning light will remain illuminated until each heating area has
cooled down.
Main Oven Light
The main oven light can be switched on, when the oven is not in use, by pressing the
oven light button on the display. The oven light will also operate whenever the main
oven door is opened.
NOTE: The oven light can be switched off when the door is opened by pressing the
oven light button on the display, or by closing the door.
Cooling Fan
The cooling fan operates with the ovens and grill. The fan will operate at full speed for
a few seconds and then reduce to a lower speed. The cooling fan will only increase to
full speed if the temperature inside the cooker reaches above a certain limit.