USER GUIDE MODEL NAME DDP-700 PAGE i TABLE OF CONTENTS WHERE TO FIND IT a glance guide to the buttons on your handset and base, and the messages on the handset display 1 The handset 2 The handset’s display 3 The base INST ALLA TION DO s AND INSTALLA ALLATION DOs DONTs how to install your DDP-700 and the things you will observed using your DDP-700-digital cordless telephone Unpacking your DDP-700 Connection and condition for use Choosing a site for the Base Radio signal between handset and base El
USER GUIDE MODEL NAME DDP-700 PAGE ii TABLE OF CONTENTS Caller ID how to use the caller ID features of your DDP-700 Call screening CID phonebook matching CID reserved and unavailable Auto talk Unanswered call review Delete CID 12 12 12 12 13 13 The phonebook how to store, edit, and delete contact names and telephone numbers in your DDP-700 handset To store name and number To edit entry To edit individual entry To delete all entry 14 15 15 16 PAGING THE HANDSET to locate the handset or all handset
USER GUIDE MODEL NAME PAGE DDP-700 iii TABLE OF CONTENTS EXP ANDING YOUR DECT EXPANDING SY STEM SYSTEM Adding new handset Pico Cellular system AD VANCE FEA TURES ADV FEATURES USE IN BUSINESS how to register additional handset to your DDP-700 cordless DECT phone. Another DDP-700 handset Another DECT GAP compliant handset how to configure your DDP-700 to cover larger area, register additional base to your DDP-700 cordless DECT phone.
USER GUIDE MODEL NAME PAGE DDP-700 1 WHERE TO FIND IT The Handset EARPHONE SOCKET EARPIECE For handsfree using headset Listening FLASH DISPLAY View Name, Number & Icon Recall during a call MUTE PHONEBOOK For private conversation during a call List of name HOLD / INT POWER OFF / OK Place the call on hold temporary / call another registered handset Turn off handset / Confirmation key during programming mode REDIAL / PAUSE MENU / MENU UP Last number Redial / Insert fix time hold between
USER GUIDE MODEL NAME PAGE DDP-700 2 WHERE TO FIND IT The Handset’s display ALPHANUMERIC DISPLAY Display Letters or Number NUMERIC DISPLAY Display Letters or Number BATTERY Battery Strength Level KEY PAD LOCK Keyboard is not Active SPEAKERPHONE Handsfree Operation NEW CALL (CID) New Call when flashing ANSWERING MACHINE Not Use MONITOR Baby Sitter or Room monitor RING MUTE Silent Ring for Handset CONVERSATION MUTE Microphone mute CALL IN PROGRESS Connected to the Telephone line or an Handset
USER GUIDE MODEL NAME PAGE DDP-700 3 WHERE TO FIND IT The Base CHARGE TERMINAL It will contact with the handset terminal when place to cradle to charge the battery. NEW CALL / IN USE INDICATOR This indicator will flash if you have missed a call (new call) During an external call, it will continuously light. RING INDICATOR When an incoming call, this indicator will light. CHARGE INDICATOR When you place the handset for charging, this indicator will light.
USER GUIDE MODEL NAME PAGE DDP-700 4 INSTALLATION DO’s AND DONT’s Unpacking your DDP-700 When you unpack your DDP-700, make sure you keep all packing materials in a safe place, in case you later need to transport it to return it for servicing.
USER GUIDE MODEL NAME PAGE DDP-700 5 INSTALLATION DO’s AND DONT’s Electrical Safety 1. DO NOT install the base unit near a sink, bath or shower or anywhere else where it could get wet. Electrical equipment can cause serious injury if used while you are wet or standing on water. 2. If the base unit ever falls into water, DO NOT retrieve it until you have unplugged the AC mains power adaptor and the telephone line plug from the telephone wall socket. 3.
USER GUIDE MODEL NAME PAGE DDP-700 6 GETTING STARTED Handset battery charge level 1. The Level of the battery power is indicated as a battery icon on the LCD display in the handset. If the battery icon shows empty, your DDP-700 need to be charge. 2. When in use and your DDP-700 emit battery low warning tone, your DDP-700 need to be charge 3. When fully charge your DDP-700 will operate for eight (8) hours talk time for earpiece, one hour for the speaker phone and 100 hours of standby time.
USER GUIDE MODEL NAME PAGE DDP-700 7 GETTING STARTED 8. Press down to go to the minutes setting. The 2 digits minutes are blinking. 9. Press the minutes directly on the numeric keypad, 01=for 1 minute, 25=25 minutes. 10. Press 11. Press the month directly on the numeric keypad, 01=January, 05=May, 11=November. 12 Press 13. Press the date directly on the numeric keypad (example : 01, 02, 10, 20, 31) 14 Press 15. Press down to go to the month setting.
USER GUIDE MODEL NAME PAGE DDP-700 8 BASIC FUNCTIONS Making a call To make a call by Pre-dialing external call Placing an external call is similar to dialing a Mobile Phone, dial the number then press the “send” key. This is the most convenient way for placing a call, since if you press a wrong number, you can delete it by pressing the clear key. 1. Dial the number you wish to call. 2. Press If you made a mistake, press to delete the number. to place the call.
USER GUIDE MODEL NAME PAGE DDP-700 9 BASIC FUNCTIONS To make a call to another handset (internal call) When you have more than one handset registered to your DDP-700 base, you can call this handset - this is internal call or handset to handset call as distinct to external call (outside telephone call). You should know the number of the other handset register to your DDP-700 to make an internal call. 1. Press followed by the handset number. Internal calling tone is heard. 2.
USER GUIDE MODEL NAME PAGE DDP-700 10 BASIC FUNCTIONS To answer a call Unless priority has been setup, your DDP-700 base and handset will ring at the same time, please see Personalized Your Setting under Ring Priority on page 21. See Page 12 if CID service is available in your telephone line. Earpiece mode 1. When your DDP-700 ring, press if it is off the base charging. If it is on the charging cradle, picking up your DDP-700 will go to TALK mode without pressing the .
USER GUIDE MODEL NAME PAGE DDP-700 11 BASIC FUNCTIONS Conference call If your have more than one handset, you can have a three (3) conference call with another handset and an external call. You should know the number of the other handset register to your DDP-700. 1. When you are engaged in external call, press followed by the handset number where you wish to have a conference call. Internal calling tone is heard, the external call is on HOLD. 2.
USER GUIDE MODEL NAME PAGE DDP-700 12 BASIC FUNCTIONS Caller ID Caller Identity Delivery (CID) is a feature of Telephone system and DDP-700 that will let you see who is calling on the line. DDP-700 CID feature will also let you know who calls you in your absence. Call Screening With CID service implemented on your telephone line, when your DDP-700 rings, the caller’s number will display on your DDP-700 handset.
USER GUIDE MODEL NAME PAGE DDP-700 13 BASIC FUNCTIONS Unanswered call review During your absence or not able to attend to a call, your DDP-700 will remember the caller’s number and time of call. Your DDP-700 base NEW CALL indicator and your handset CID icon will flashing indicating a missed calls. Your DDP-700 can saved 25 missed calls. If calls is more than 25, the old callers will be deleted to give space for new callers. To review caller’s during your absence, down.
USER GUIDE MODEL NAME PAGE DDP-700 14 BASIC FUNCTIONS The Phonebook Your DDP-700 can store 40 names and numbers. For each entry, you can program a name of 8 characters, number up to 18 digits. You can store new number, edit existing number or delete. To store name and number up to select PHONEBOOK menu. 1. Press 2. Press 3. Press 4. Key in the name (maximum 8 characters). Please see table of alphanumeric table below 5. Press 6. Key in the telephone number (maximum 18 digits) 7.
USER GUIDE MODEL NAME PAGE DDP-700 15 BASIC FUNCTIONS To edit entry up to select PHONEBOOK menu. 1. Press 2. Press 3. Press 4. Press 5. Search the name to be edit using 6. Press to select EDIT. . Press . to delete a character to the left side of the cursor or add character by pressing the correct letter. 7. Press 8. Press . A confirmation tone and the LCD will display the number. to delete a number to the left side of the cursor or add number by pressing the correct number. 9.
USER GUIDE MODEL NAME PAGE DDP-700 16 BASIC FUNCTIONS To delete all entry to select PHONEBOOK menu. 1. Press 2. Press 3. Press 4. Press 5. Your handset will prompted CONFIRM?. (WARNING : Press 6. Press 7. Press to select DEL ALL. . . This will delete all entries) to delete all Names and Number. A confirmation is hear. two times to exit DELETE ALL programming mode and return to standby mode.
USER GUIDE MODEL NAME PAGE DDP-700 17 BASIC FUNCTIONS Paging the handset This feature is very useful if you can’t remember where you put your handset - you can make it ring by pressing the PAGE button on your DDP-700 base. All registered handsets will ring. You can stop each handset by pressing any key on the handset keypad.
USER GUIDE MODEL NAME PAGE DDP-700 18 PERSONALIZED YOUR SETTING Ring and Melody Handset ring volume This will set Incoming call (call from PSTN) and internal call (call from other registered handset) ring volume. 1. Press up to select HANDSET menu. 2. Press . 3. Press 4. Press 5. Press 6. Press 7. Press and hold VOLUME menu will appear. . The handset will ring the current volume setting. Default is VOLUME 5. to select Volume off (VOL OFF), 1,2,3,4 and 5 levels. Level 5 is the maximum.
USER GUIDE MODEL NAME PAGE DDP-700 19 PERSONALIZED YOUR SETTING Handset ring melody for internal call This will set Internal call (call from other registered handset) ring melody. up to select HANDSET menu. 1. Press 2. Press 3. Press 4. Press . The handset will ring the current INT melody setting. The default is melody 5. 5. Press to select 1,2,3,4 and 5 different melody tones. 6. Press 7. Press 8. Press and hold to select INT RING. . A confirmation tone is heard.
USER GUIDE MODEL NAME DDP-700 PERSONALIZED YOUR SETTING Base ring melody This will set Incoming call (call from PSTN) ring melody. up to select BASE menu. 1. Press 2. Press 3. Press 4. Press 5. Press 6 Press 7. Press 8. Press 9. Press 10 Press and hold . to select RINGER. . to select MELODIES. The Base will ring the current ring melody setting. The default is melody 1. to select 1,2,3,4 and 5 different melody tone. . A confirmation tone is heard.
USER GUIDE MODEL NAME PAGE DDP-700 21 PERSONALIZED YOUR SETTING Ring Priority This function will set the handset or base to ring first when an external incoming call takes place. You can set the number of rings takes place on the device prioritized before other will ring. When base is the priority to ring first, CID inforamtion will only appear on the LCD when handset start to ring. While the base is ringing, press the talk key on handset will not seized the line.
USER GUIDE MODEL NAME PAGE DDP-700 22 PERSONALIZED YOUR SETTING Warning Tones This will set tones on or off. to select HANDSET menu. 0. Press 1. Press 2. Press to select TONES. 3. Press . 4.1 KEY (when you press the keypad tone will emit if set to ON) 4.1.1 Press 4.1.2. Press to select YES or NO. 4.1.3 Press . A confirmation tone is heard. 4.2 CONFIRM (in programming, it will emit a tone for “confirmation” if set to ON) 4.2.1 Press 4.2.2 Press 4.2.
USER GUIDE MODEL NAME PAGE DDP-700 23 PERSONALIZED YOUR SETTING 4.4 Range (if your DDP-700 is out of coverage, it will emit a tone, if set to ON) 4.4.1 Press 4.4.2 Press 4.4.3 Press to select YES or NO. 4.4.4 Press . A confirmation tone is heard. Note : to select RANGE menu. In any case, Press to exit, press 2 times to exit Warning Tone Programming and go to standby mode. The call timer Your DDP-700 will display the time you take in using the handset during conversation.
USER GUIDE MODEL NAME PAGE DDP-700 24 PERSONALIZED YOUR SETTING The handset name You can change the name of your DDP-700 handset. The default name is HANDSET. to select HANDSET menu. 1. Press 2. Press 3. Press to select HS NAME. 4. Press . 5. Key in the name (maximum 8 characters). Please see table of Alphanumeric Keypad on page 14. Press to delete a character to the left side of the cursor or add character by pressing the correct letter. 6. Press . A confirmation tone is heard. 7.
USER GUIDE MODEL NAME PAGE DDP-700 25 PERSONALIZED YOUR SETTING The keypad protect To prevent accidental dialing, use the KEYPAD LOCK Mode. Your DDP-700 will not respond to any key except MENU Key ( up) Set keypad to lock 1. Press 2. Press 3. Press 4. Press up to select KEY LOCK menu. . to select YES . Your DDP-700 will now go to standby-Keylock mode. The Key Icon will display on the LCD. Set keypad to active up to select KEY LOCK menu. 1. Press 2. Press 3. Press to select NO. 4.
USER GUIDE MODEL NAME PAGE DDP-700 26 PERSONALIZED YOUR SETTING Set the clock 0. Press 1. Press 2. Press 3. Press 4. Press 4.1 to select HANDSET menu. to select CLOCK. to select AUTOMATIC, SET CLOCK , OFF or ON. Auto calibration 4.1.1 Press . 4.1.2 Press to select YES or NO. Note : When you select to YES, the time will be base on the TIME of the Telephone Network. The time setting by your will be obtain from the time of Caller ID.
USER GUIDE MODEL NAME PAGE DDP-700 27 PERSONALIZED YOUR SETTING Set alarm clock Your DDP-700 alarm function is set on daily basis. After alarm, the function will set to alarm off. You need to set again to “on”. Alarm duration is 30 seconds. Press any key on your DDP-700 to stop the alarm. 0. Press 1. Press 2. Press 3. Press 4. Press 4.1 to select HANDSET menu. to select ALARM. to select ALARM TIME or SET ALARM. Alarm time 4.1.1 Press . The hour setting is blinking. 4.1.
USER GUIDE MODEL NAME PAGE DDP-700 28 PERSONALIZED YOUR SETTING Baby sitter Monitor Mode is used for Baby sitter or for Room Monitoring (the handset is put in child’s bedroom and monitor the room for crying, noise, etc). When you have one handset registered to your DDP-700 base, the other handset can be set to BABYSIT MODE. Set to “ON” 1. Press 2. Press 3. Press 4. Press up to select BABYSIT menu. . to select YES. . A confirmation tone is heard. Your DDP-700 will go to BABSIT MODE.
USER GUIDE MODEL NAME PAGE DDP-700 29 EXPANDING YOUR DECT SYSTEM Adding new handset Another DDP-700 handset Your DDP-700 Mini DECT cordless phone is a GAP compliant (Generic Access Profile) which can access and interwork with other GAP DECT. You can register up to five GAP DECT handsets to your DDP-700 base. The handset number is displayed at the right side upper corner of the LCD of your handset. It is label as 1 to 5.
USER GUIDE MODEL NAME PAGE DDP-700 30 EXPANDING YOUR DECT SYSTEM Pico cellular system Your DDP-700 MINI DECT cordless phone can be configure as a pico-cellular system by adding more base placed in different locations. This will extend your handset mobility. This application can be implemented in the office or factory.
USER GUIDE MODEL NAME PAGE DDP-700 31 EXPANDING YOUR DECT SYSTEM Register another DDP-700 base 1. Press 2. Press up to select REGISTER menu. . Your DDP-700 LCD will display BS 1 2 3 4. One (1) is flashing indicate that this handset has been register to base 1. 3. Press 2, to select that this handset will be register to another base #2 (other than the original base). 4. Enter the current PIN code of your DDP-700 system. Press .
USER GUIDE MODEL NAME PAGE DDP-700 32 EXPANDING YOUR DECT SYSTEM DDP-700 mobility Your handset can be used in two locations. You can use your DDP-700 handset at home with your base station and you can bring your DDP-700 handset to your office, thus you are using a single handset for home and office. Your DDP-700 handset must be register to your base station at office.
MODEL NAME USER GUIDE PAGE 33 DDP-700 ADVANCE FEATURES Programming The following will describe some features of your DDP-700 cordless phone for users who want to do more than simply make and answer calls. If you have only one handset and base unit, and if you do not need to prevent unauthorized use of your DDP-700 DECT phone, you probably won’t need the Advanced Features. Changed PIN Code Due to the restriction for programming, your DDP-700 must be protected with user PIN. The default PIN is 0000.
USER GUIDE MODEL NAME PAGE DDP-700 34 ADVANCE FEATURES Dialing Mode Choose this features to changed the dialing mode of your DDP-700. Before you do so, please consult your telephone company. It is better not to changed this, since your DDP-700 was preset to DTMF mode wherein most telephone network can accept. up to select BASE menu. 1. Press 2. Press . 3. Press . To select ADVANCED. 4. Press . The LCD will display PIN. Enter the current PIN Code. 5. Press .
USER GUIDE MODEL NAME PAGE DDP-700 35 ADVANCE FEATURES PABX Choose this features if your DDP-700 is to be used with PABX. Refer to page 50 : Business application of DDP-700 up to select BASE menu. 1. Press 2. Press . 3. Press . To select ADVANCED. 4. Press . The LCD will display PIN. Enter the current PIN Code. 5. Press . LCD will display CALL BAR if correct PIN entered otherwise it display ADVANCED. 6. Press to select PABX PAUSE. 7. Press . 8.
USER GUIDE MODEL NAME PAGE DDP-700 36 ADVANCE FEATURES De-register a handset If you have more than one handset register to you base, you can de-register (remove subscription from your DDP-700 base) the other handset. If you have only one handset, you cannot de-register your own DDP-700 handset to its base. up to select BASE menu. 1. Press 2. Press . 3. Press . To select ADVANCED. 4. Press . The LCD will display PIN. Enter the current PIN Code. 5. Press .
USER GUIDE MODEL NAME PAGE DDP-700 37 ADVANCE FEATURES Default setting This feature will restore the default setting of your DDP-700 cordless phone. All programming earlier done like setting the ringing volume, ringing melody, PIN, external call melody, etc. will be defaulted. up to BASE menu. 1. Press 2. Press 3. Press . To select ADVANCED. 4. Press . The LCD will display PIN. Enter the current PIN Code. 5. Press .
USER GUIDE MODEL NAME PAGE DDP-700 38
USER GUIDE MODEL NAME DDP-700 PAGE 39
USER GUIDE MODEL NAME DDP-700 PAGE 40
USER GUIDE MODEL NAME PAGE DP-700 41 ADVANCE FEATURES Primary code This is gateway number for the LCR Network who provide the service of routing the call. In one location, it is possible that there are more than one LCR network provider. 1. Press up to select LCR menu. 2. Press . Your DDP-700 will ask you to enter the PIN Code. (See PIN CODE Setting) 3. Enter the PIN Code. Press 4. Press 4.1 . to select PRIMARY. Set PRIMARY Code 4.1.1 Press . Enter the “ LCR access code” number.
USER GUIDE MODEL NAME PAGE DDP-700 42 ADVANCE FEATURES Others Code This feature of your DDP-700 will allow you to specify your preferred LCR access code and preferred area code. If you dial the area code that match one of the area code in the Others code table, it will route your call using your preferred access code. 1. Press up to select LCR menu. 2. Press . Your DDP-700 will ask you to enter the PIN Code. (See PIN CODE Setting) 3. Enter the PIN Code. Press 4. Press 4.1 . to select OTHERS.
MODEL NAME USER GUIDE DDP-700 PAGE 43 ADVANCE FEATURES 4.3 Press to select DELETE 4.3.1 Press . 4.3.2 Search the code to be delete using 4.3.3 Press . The LCD will ask you to CONFIRM. 4.3.4 Press to confirm delete. 4.3.5 Press and Hold . to exit LCR programming and return to standby mode, press once to exit delete individual access and area code or repeat 4.3 to delete another codes. 4.4 Press to select DELETE ALL 4.4.1 Press . 4.4.
MODEL NAME USER GUIDE DDP-700 PAGE 44 ADVANCE FEATURES LCR On / Off The LCR feature of your DDP-700 can be turn it ON or OFF. You must turn to ON if you use LCR feature. 1. Press up to select LCR menu. 2. Press . Your DDP-700 will ask you to enter the PIN Code. (See PIN CODE Setting) 3. Enter the PIN Code. Press 4. Press 5. Press 6. Press and Hold . to select NO or YES. . A confirmation tone is heard. to exit LCR programming and return to standby mode.
USER GUIDE MODEL NAME PAGE DDP-700 45 ADVANCE FEATURES FACTORY PRESET -Routable Code: It is highly recommended that you just leave this codes untouched. However, if you add routable codes you can program them. Factory preset area codes are : 0, 00, 3 and 4. Routable Code This is the routable code number and is preset in the factory. When LCR is “on”, your DDP-700 will compare the dialed number to the routable code table, if it match, it will route the call. 1. Press up to select LCR menu. 2.
USER GUIDE MODEL NAME PAGE DDP-700 46 ADVANCE FEATURES 4.3 Press to select DELETE 4.3.1 Press . 4.3.2 Search the code to be delete using 4.3.3 Press 4.3.4 Press 4.3.5 A confirmation tone is heard if you press 4.3.6 Press and Hold . . Your DDP-700 will prompt to you, CONFIRM? to confirmed delete or press to cancel delete. . to exit LCR programming and return to standby mode, press once to exit delete individual routable code or repeat 4.3 to delete another code. 4.
MODEL NAME USER GUIDE PAGE 47 DDP-700 ADVANCE FEATURES FACTORY PRESET - Special Code It is highly recommended that you just leave this codes untouched. However, if you add non-routing special codes, you can program them. Factory preset special codes are : 0366, 0369, 0563, 0769, 0878, 0989. Special Code This is the non-routing codes which bypass the LCR function even the first or first two digits fall under routable area codes. You can enter up to 10 special codes, each up to 6 digits.
MODEL NAME USER GUIDE DDP-700 PAGE 48 ADVANCE FEATURES 4.3 Press to select DELETE 4.3.1 Press . 4.3.2 Search the code to be delete using 4.3.3 Press 4.3.4 Press 4.3.5 A confirmation tone is heard if you press 4.3.6 Press and Hold . . Your DDP-700 will prompt to you, CONFIRM? to confirmed delete or press to cancel delete. . to exit LCR programming and return to standby mode, press once to exit delete individual special code or repeat 4.3 to delete another code. 4.
USER GUIDE MODEL NAME PAGE DDP-700 49 ADVANCE FEATURES Call Barring Choose this features if you would like to restrict your DDP-700 to use for calling. There are three ways you can restrict your DDP-700 for calling numbers: a) Local b) National c) International When you restrict your DDP-700 for local call, any number you diaL will be barred. If you restrict your DDP-700 to National, any telephone number starting with “0” and or “00”, your DDP-700 will not dial.
USER GUIDE MODEL NAME DDP-700 PAGE 50 USE IN BUSINESS USE IN BUSINESS? Your DDP-700 can be plugged into an extension socket on most PABX. It cannot, however, be guaranteed that it will work satisfactory with all type of PABXs, if you have problems, please consult the authorized maintainer of your PABX. Before attempting to use your DDP-700 in your PABX, please refer to the features described in your PABX User Manual. Dialing type Your DDP-700 is set to tone dialing.
USER GUIDE MODEL NAME PAGE DDP-700 51 TROUBLESHOOTING GUIDE TROUBLESHOOTING GUIDE Problem Possible Cause Action Taken Programming Display NOT AVAIL RF Interference occur during programming. Retry the programming, if possible move closer near the DDP-700 base station Interference during communications Out of range or close to other electrical appliances Check the handset is not emitting the out of range warning tone. If close to other electrical device move away.
USER GUIDE MODEL NAME PAGE DDP-700 52 TROUBLESHOOTING GUIDE Problem Possible Cause Action Taken Base Station does not function Error in connection or lack of power supply. Ensure that the Adaptor power supply has been connected to the DDP-700 and and the adaptor is properly plug in to the AC power plug. Ensure that the AC power should match the Adapotr AC voltage. Handset does not function Battery pack may not be installed correctly. Ensure that the battery pack has been correctly installed.
USER GUIDE MODEL NAME PAGE DDP-700 53 PROGRAMMING QUICK REFERENCE GUIDE MAIN MENU NEW EDIT DELETE DEL ALL PHONEBOOK NAME NUMBER NO YES PRIMARY ROUTABLE SPECIAL OTHERS LCR LANGUAGE ENGLISH ITALIANO REGISTER BS 1,2,3,4 B ABY SIT ABYSIT YES / NO KEY LOCK YES / NO BASE RINGER New, Edit Delete, Del All VOLUME 1~5 VOLUME OFF VOLUME MELODIES PRIORITY MELODY 1~5 NO YES SETUP A BASE HANDSET 1~5 B
USER GUIDE MODEL NAME PAGE DDP-700 54 PROGRAMMING QUICK REFERENCE GUIDE A LOCAL, NATIONAL INTERNATIO NO BARRING B ADVANCED CALL BAR PIN CODE DIAL MODE PABX PAUSE DEL HS DEFAULT HANDSET 1 ~5 TONE PULSE PBX CODE PAUSE HANDSET 1 ~5 VOLUME 1~5 VOLUME OFF VOLUME EXT RING INT RING TONES HANDSET TIMER HS NAME CLOCK MELODY 1 ~5 KEY CONFIRM LOW BATT RANGE AUTOMATIC SET CLOCK OFF ON HOUR MINUTE MONTH DATE ALARM TIME SET ALARM HOUR MINUTE ALARM YES NO
MODEL NAME USER GUIDE DDP-700 PAGE 55 TECHNICAL DETAILS Standard Digital Enhanced Cordless Telecommunications (DECT) Frequency 1.88 to 1.9 GHz Channel Bandwidth 1.728 MHz Modulation GFSK Data Rate 1.