Cordless DECT Phone User Guide

MODEL NAME
DDP-700
USER GUIDE
PAGE
Default setting
This feature will restore the default setting of your DDP-700 cordless phone. All programming earlier done like
setting the ringing volume, ringing melody, PIN, external call melody, etc. will be defaulted.
1. Press up to BASE menu.
2. Press .
3. Press . To select ADVANCED.
4. Press . The LCD will display PIN. Enter the current PIN Code.
5. Press . LCD will display CALL BAR if correct PIN entered otherwise it display ADVANCED.
6. Press to select DEFAULT.
7. Press . Your handset will ask you to CONFIRM?
8. Press . A confirmation tone will be heard. Your handset (or all handset register to the base) will
temporarily lost subscription link to the base, after few seconds, the handset will acquire again the link to
the base. The time display on the LCD would take around 60 second to display.
9. Press and hold to exit DEFAULT SETTING and return to standby mode.
Note :
When performing the default <reset>
- The phonebook memory will not erase entries
- LCR Codes and programming entries will retain
- Handset Name will not change
ADVANCE FEATURES
37