Owner's manual

11
It is possible to change between high and low fan speed at any point in the cooking process
(does not apply to PROVING).
Note that the 2/3 models have only one fan speed.
(10)Time
The time can be set from 1 min. to 23 hours and 59 min.
When the time has run out, the steamer automatically stops and an alarm sounds.
The pre-set time can also be changed while the program is running.
(11)Oven chamber temperature
The temperature range depends on the operating mode chosen:-
•HOT AIR 20 - 250°C
•COMBI STEAMING 20 - 250°C
•REGENERATING 110 - 160°C
•PROVING 20 - 40°C
The temperature can be changed any time during the program.
(12) Core temperature
The core temperature can be set between 20 and 99°C.
(13) Storing key (memory)
This key has two functions:
A) ENTER: Time, temperature, core temperature. Storing changes to
pre-selected settings for the operating modes.
B) STEP: Programming up to six steps. The display will show which
step you are in. (See 15).
(14)ON/OFF operating mode
Turn the operating modes on and off by pressing key (14).