Owner's manual

With this function, you retrieve one of the menus 1 - 199 programmed in the control. Press F1 three

times, press 1, and conclude by pressing ENTER-STEP.

Contrast adjustment:

Adjusting background light and contrast in the display.

Press F1 three times, press 2 and the adjustment is made with keys 2 (lighter) and 8 (darker).

The background light is adjustable with keys 1 (lighter) and 7 (darker).

Conclude by pressing F1.

Change pre-settings:

Every time one of the six operating modes (HOT AIR, COMBI, etc.) are selected, each will appear

with pre-selected values for temperature, time, maybe core temperature, fan, and exhaust.

These pre-settings can be changed:

Select "Change pre-selected values" by pressing F1 three times and pressing 3. Enter the

new/changed values and conclude by pressing ENTER-STEP.

Serial port:

A HACCP printer can be connected by pressing 1. At the end of the program, you will be asked

whether you require a printout.

Disconnect the printer by pressing 0.

The HACCP printer is an optional extra which can be ordered from the combi-steamer

manufacturer.