Installation Guide

Apply a coat of primer and then a first coat of paint.
Install moulding.
Putty the nail holes and sand putty when dried.
Mask with tape around edges of moulding to protect walls, floor and other moulding or use a paint shield.
Apply another coat of paint. Remove masking tape before paint dries completely (if the position of the
moulding makes masking difficult or makes the moulding hard to reach, you may wish to apply the final coat of
paint before installing).
Staining works well for House of Fara solid oak mouldings to bring out the wood’s natural beauty. If you wish to paint
your mouldings to match room décor, try using House of Fara white hardwood mouldings.