user manual

44

Using Video Edit
When a video clip is paused, press the Fn/Delete button to enter Video Edit mode. An Edit Panel displayed in
the lower left corner of the screen while the time bar and video length display in the bottom of the screen.
Star Point
Return
Preview
Save
End Point
T
ime Bar
Video Len
g
th
Edit Panel
Set Start/End point
1. Press Up/Down key on the navigation control to
select
to set start point to trim the
beginning of the video;
to trim the end of
the video to set end point.
2. Press Left/Right key on the navigation
control to move
on each 1/30 second
interval. The video len
g
th must be at least
more than 2 seconds.
3. Select the
to preview or to save
the video clip.
4. Select
and press OK to exit Video
Edit mode and return to the paused time
whether the Start/End point is set or not.
The edited video clip will be saved as a separate file that can be performed video edit
again.