- HP Network Switch User Manual
Table Of Contents
- ProCurve Switch 1700-8 and 1700-24 Management and Configuration Guide
- Title Page
- Copyright and Disclaimer Notices
- Contents
- 1. Getting Started
- 2. Using the ProCurve Web Browser Interface
- Overview
- Navigating the Web Browser Interface
- Web Configuration
- Displaying System Information
- Displaying the System Name
- Setting the Switch’s IP Address
- Configuring the Logon Password
- Rate Limits
- Port Configuration
- Port Mirroring
- Showing Port Statistics
- Trunk Membership
- Trunk Configuration
- LACP Settings
- LACP Status
- VLAN Setup
- VLAN Port Config
- LLDP Configuration
- LLDP Neighbor Table
- SNMP Configuration
- Ping Test
- Restore to Factory Defaults
- Reboot Switch
- Upload/Download Configuration
- Download Text Readable Configuration/Status File
- Update Software
- Support
- 3. Troubleshooting
- Index
- Back Cover
1-3
Getting Started
Sources for More Information
Getting Started
Sources for More Information
To Set Up and Install the Switch in Your Network
Use the Installation and Getting Started Guide shipped with your switch for
the following:
■ Instructions for physically installing the switch in your network.
■ Quickly assigning an IP address, subnet mask, and gateway, set a
Manager password, and (optionally) configure other basic features.
■ Interpreting LED behavior.
■ Notes, cautions, and warnings related to installing and using the
switch.
For the latest version of the Installation and Getting Started Guide and other
documentation for your switch, visit to the ProCurve Networking Web site.
(Refer to “Getting Documentation From the Web” on page 1-2.)