Quick Specs

ManualsBrandsHP ManualsComputer MonitorsZ24i G2 24" 16:10 IPS Monitor

QuickSpecs

HP Z24i G2 24-inch Display

Technical Specifications

c05574095 — DA 16013 — Worldwide — Version 3 — January 4, 2018

Page 8

HP UHD USB Graphics Adapter — Part

number N2U81AA

Just plug the adapter into any USB 2.0 or 3.0 port on your

PC and connect the DisplayPort™ connector on the other

end to your UHD display.

HP Single Monitor Arm — Part number

BT861AA

The flexible design of the HP Single Monitor Arm provides a

seemingly endless range of display adjustments with an

amazing 13 inches of lift, 50 degrees of tilt, and 360

degrees of pan and rotation – all at your fingertips --

helping you stay comfortable and productive throughout

the day.

HP Adjustable Dual Display Stand —

Part Number AW664AA

Premium space-saving dual screen solution provides

access to more monitor real estate and makes it possible

to manage multiple applications simultaneously. Weight

adjustable for dual monitors from 17-24”. Rotate displays

into portrait/landscape positions.

HP Business PC Security Lock v2 Kit —

Part Number N3R93AA

Help prevent chassis tampering and secure your PC and

display in workspaces and public areas with the HP

Business PC Security Lock v2 Kit.

The information contained herein is subject to change without notice. The only warranties for HP products are set forth in the

express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an

additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

*All performance specifications represent the typical specifications provided by HP's component manufacturers; actual

performance may vary either higher or lower.

DisplayPort™ and the DisplayPort™ logo are trademarks owned by the Video Electronics Standards Association (VESA®) in the

United States and other countries.

ENERGY STAR is a registered trademark owned by the U.S. Environmental Protection Agency.

1. Default Power is measured with factory defaults, including factory default brightness and USB ports loaded at 25% of maximum.

2. Maximum Power is measured with monitor at maximum brightness and with USB ports loaded at 100% of maximum.

3. External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may not be

Low Halogen.

4. Sold separately. See product QuickSpecs for exact device and display compatibility.

5. The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting

surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the

VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or construction professional to

determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that your mounting

solution is properly installed to support applied loads.

6. EPEAT® registered where applicable/supported. EPEAT registration varies by country. See www.epeat.net for registration status by

country.

7. Service levels and response times for HP Care Pack Services may vary depending on your geographic location. Service starts from date

of hardware purchase. Restrictions and limitations apply. See http://www.hp.com/go/cpc for details.