Instruction Manual

Migrating pari

ty groups in CLPRs

You can migrate parity groups in a CLPR to another CLPR.

NOTE:

You cannot migrate parity groups to a CLPR belonging to a CU group other than the current CPLR.

NOTE:

Multiple parity groups that construct the concatenated parity group must belong to the same CLPR.

NOTE:

You cannot migrate the parity group that contains the LDEVs to which the Cache Residency cache extents

is deﬁned to another CLPR.

1. Conﬁrm the current CU group in the drop-down list for CU groups in the upper right of the XP

Remote Web Console main pane.

NOTE:

To change the CU group, select the desired CU group from the drop-down list for CU

groups in the upperright of theXPRemoteWeb Consolemainpane. Formoreinformation

about CU groups, see the HP StorageWorks XP Remote Web Console user guide for

XP12000/XP10000/SVS200.

2. Double-click the SLPR in the tree. CLPRs appear under the speciﬁed SLPR in the tree.

3. Select a CLPR from the tree. The selected CLPR's resource list appears.

NOTE:

If a CLPR has this icon (

) and is grayed out, you cannot select the CLPR. To change the

CU group, return to step 1.

4. Right-click the parity groups you want to migrate from the CLPR, and select Cut.

NOTE:

Youcan select themultipleparitygroups.

5. Right-click the CLPR you want to migrate the parity groups to, and select Paste Parity Group.The

selected parity groups are added to the CLPR resource list.

NOTE:

YoumustselectaCLPR that hasthisicon(

) and black characters for the destination CLPR.

6. Click Apply The progress bar appears.

HP StorageWorks