HP IP Console Switch User Guide June 2003 (Second Edition) Part Number 263924-002 HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: a-frnt.
© 2003 Hewlett-Packard Development Company, L.P. ® ® ® Microsoft , Windows , and Windows NT are U. S. registered trademarks of Microsoft Corporation. ® Energy Star is U.S. registered mark of the United States Environmental Protection Agency. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided “as is” without warranty of any kind and is subject to change without notice.
Contents About This Guide Audience Assumptions...................................................................................................... ix Important Safety Information ............................................................................................ ix Symbols on Equipment ..................................................................................................... ix Rack Stability .............................................................................................
Contents Setting up Your Network.................................................................................................2-3 Rack Mounting the IP Console Switch............................................................................2-3 Using Side Mount 0U Installation.............................................................................2-4 Using Rear Rack Installation.....................................................................................2-8 Using Standard 1U Installation ..
Contents Assigning Server Names ............................................................................................... 6-10 Accessing the Names Dialog Box........................................................................... 6-10 Assigning Names to Servers ................................................................................... 6-11 Assigning Device Types................................................................................................
Contents Running System Diagnostics .........................................................................................6-35 Running Diagnostics Test .......................................................................................6-35 Resetting the PS/2 Mouse ..............................................................................................6-40 Displaying Version Information ....................................................................................
Contents Mouse Compliance Statement........................................................................................ A-4 European Union Notice .................................................................................................. A-5 Japanese Notice .............................................................................................................. A-6 BSMI Notice...................................................................................................................
About This Guide This guide provides step-by-step instructions for installation and reference information for operation, troubleshooting, and upgrades for the HP IP Console Switch. Audience Assumptions This guide is for the person who installs, administers, and troubleshoots IP Console Switches. HP assumes you are qualified in the servicing of equipment and trained in recognizing hazards in products with hazardous energy levels.
About This Guide This symbol indicates the presence of hazardous energy circuits or electric shock hazards. Refer all servicing to qualified personnel. WARNING: To reduce the risk of injury from electric shock hazards, do not open this enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel. This symbol indicates the presence of electric shock hazards. The area contains no user- or field-serviceable parts. Do not open for any reason.
About This Guide Rack Stability WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that: • The leveling jacks are extended to the floor. • The full weight of the rack rests on the leveling jacks. • The stabilizing feet are attached to the rack if it is a single-rack installation. • The racks are coupled together in multiple-rack installations. • Only one component is extended at a time.
About This Guide Related Documents For additional information on the topics covered in this guide, refer to the HP IP Console Switch Software Guide. Getting Help If you have a problem and have exhausted the information in this guide, you can get further information and other help in the following locations. Technical Support In North America, call the HP Technical Support Phone Center at 1-800-652-6672. This service is available 24 hours a day, 7 days a week.
About This Guide HP Website The HP website has information on this product as well as the latest drivers and flash ROM images. You can access the HP website at www.hp.com. For product specific information, refer to the following website, http://h18004.www1.hp.com/products/servers/proliantstorage/rack-options/kvm/indexconsole.html. Authorized Reseller For the name of your nearest authorized reseller: • In the United States, call 1-800-345-1518. • In Canada, call 1-800-263-5868.
1 Overview The HP IP Console Switch combines analog and digital technology to provide flexible, centralized keyboard, video, and mouse (KVM) control of data center servers. This solution provides enterprise customers with a significant reduction in cable volume, secure remote access, and high performance server KVM access. Each unit has 16 server ports (with RJ-45 connections) and provides optimal digital video performance with a maximum resolution of 1280 x 1024 at 75 Hz, up to 15.
Overview Features The features of the IP Console Switch include: 1-2 • Both local and IP KVM functionality • Support for up to 128 servers • Firmware flashable over serial port and NIC • Compatibility with HP video monitors and “hotkeys” on all HP keyboards, including the HP TFT5600RKM • Field-terminable CAT5 cables • Near real-time mouse/cursor speed • Multiple language support through programmable ROM SoftPaq—English, Spanish, French, Dutch, German, Italian, and Japanese • Support for 10
Overview Benefits The benefits of the IP Console Switch include: • Significant reduction of KVM cable volume by using an Interface Adapter and single unshielded twisted pair (UTP) CAT5 cabling • Facilitation of KVM access in higher server density environments because of an increase in the number of ports available • KVM access through network connection — No special software or drivers are required on the attached computers, including the host.
Overview IP Console Switch Components 1 100-240V 2 3 4 5 6 7 8 , 1.0A, 50/60 Hz T 2A, 250 VAC 9 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CAUTION: For continued protection against risk of fire, replace only with same type and rating of fuse.
Overview 2 100-240V , 1.0A, 1 T 2A, 250 VAC 50/60 Hz CAUTION: For continued protection against risk of fire, replace only with same type and 1 2 rating of fuse. 3 4 5 6 7 8 9 10 11 12 13 14 15 16 3 A 1 4 5 6 7 Figure 1-2: Example of an IP Console Switch configuration A 1 Item Description 1 CPU 2 IP Console Switch 3 Interface Adapter 4 Network 5 Keyboard connector 6 Mouse connector 7 Video connector HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L.
2 Installing the IP Console Switch You must install the IP Console Viewer prior to using the IP Console Switch. The IP Console Viewer enables you to view and control a server attached to the console switch system, configure and maintain the system, and prevent unauthorized access to the console switch through IP connection. For more information, refer to the HP IP Console Switch Software Guide included on the Rack Products Documentation CD.
Installing the IP Console Switch Installation Checklist Before installing the IP Console Switch, refer to the following lists to be sure that all of the listed components were received. Kit Contents • IP Console Switch • Power cords • Rack mounting kit • Download serial cable • Documentation kit • Firmware/software CD • CAT5 crossover cable Required Tool You need a Phillips screwdriver.
Installing the IP Console Switch Setting up Your Network The IP Console Switch system uses IP addresses to uniquely identify the console swtiches and computers running the IP Console Viewer. The IP Console Switch supports both BootP (a subset of DHCP) and static IP addressing. HP recommends that IP addresses be reserved for each unit and that they remain static while the console switches are connected to the network.
Installing the IP Console Switch Using Side Mount 0U Installation Type A To side mount the IP Console Switch: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1. Attach the side-mounting brackets to the console switch, using two screws on each side. Figure 2-1: Attaching the side-mounting brackets 2-4 HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: c-ch2 Installing.
Installing the IP Console Switch 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 2. Slide the tabs on the side-mounting brackets into the same U location on each side of the rack. Figure 2-2: Sliding the tabs into the rack 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 3. Secure the console switch to the rack frame, using two screws on each side. Figure 2-3: Securing the console switch HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: c-ch2 Installing.
Installing the IP Console Switch Type B 1. Attach the side-mounting brackets to the console switch, using two screws on each side. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 2. Slide the tabs on the side-mounting brackets into the same U location on each side of the rack. Figure 2-4: Sliding the tabs into the rack 2-6 HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: c-ch2 Installing.
Installing the IP Console Switch 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 3. Insert four cage nuts into the rack frame in the location of the side-mounting bracket holes. Figure 2-5: Inserting cage nuts 4. Secure the console switch to the rack frame, using two screws on each side. HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: c-ch2 Installing.
Installing the IP Console Switch Using Rear Rack Installation IMPORTANT: If you are installing a console switch with a 1U component, such as the 1U Keyboard Drawer Rack Option Kit, additional rack space is not required, making it a 0U installation. To install the IP Console Switch in the rear of the rack: 1. Attach the slide rail brackets to the console switch, using two screws on each slide. 100-24 0V , 1.
Installing the IP Console Switch 2. If a cage nut is not already installed behind the rear rail, install one at this time. 3. Slide the console switch, with the slide rail brackets, into the rail-mounting brackets already installed in the rack. 100-2 40V T 2A, , 1.0A, 250 VAC 50/60 Hz CAUT ION: For contin ued protec tion agains t risk of fire, replac e only with same type and 1 2 rating 3 4 of fuse. 5 6 7 8 9 10 11 12 13 14 15 16 Figure 2-7: Sliding the console switch into the rack 4.
Installing the IP Console Switch Using Standard 1U Installation To install the console switch: 1. Attach the slide rail brackets to the console switch, using the two screws on each side. 2. Use the template that was shipped with the component to mark the location of the mounting hardware. a. Push back the tabs (marked Õ) on the top of the template, and place them in the correct holes in the mounting rails. Figure 2-9: Measuring with the rack template b.
Installing the IP Console Switch 3. Install two cage nuts into the holes marked by the template at the rear of the rack. Figure 2-10: Installing cage nuts 4. Loosely attach the wing nuts (1), and extend the adjustable rail-mounting brackets to the desired length (2). 1 2 Figure 2-11: Adjusting rails HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: c-ch2 Installing.
Installing the IP Console Switch 5. Tighten the wing nuts slightly to stabilize the adjustable rails during installation. 6. Insert an adjustable rail into the rack, and hook the tabs into the appropriate holes at the rear of the rack, aligning the screws holes at the front of the rack. 7. Secure the rear of the adjustable rail, using one screw for each cage nut previously installed. Figure 2-12: Securing the adjustable rail 2-12 HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L.
Installing the IP Console Switch 8. Secure the front of the adjustable rail to the rack, using two screws for each rail. Figure 2-13: Securing the adjustable rail 9. Slide the console switch into the adjustable rails, and secure it to the rear of the rack, using one screw on each side. 100-2 40V T 2A, , 1.0A, 250 VAC 50/60 Hz CAUT ION: For contin ued protec tion agains t risk of fire, replac e only with same type and 1 2 rating of fuse.
Installing the IP Console Switch 10. Position the front cover panel, and secure it to the front of the rack, using one screw on each side. 100-2 40V T 2A, , 1.0A, 250 VAC 50/60 Hz CAUT ION: Figure 2-15: Positioning the front cover panel Configuring the IP Console Switch Hardware To configure the IP Console Switch hardware: 1. Connect one end of a serial cable to an available COM port on the server that is to be viewed locally from the IP Console Switch. 2.
Installing the IP Console Switch 5. Configure the terminal emulation software for the server, such as HyperTerminal ® ® for Microsoft Windows operating systems or Minicom for Linux operating systems. To configure HyperTerminal: a. From the desktop screen, click Start, Programs, Accessories, Communications, HyperTerminal. The Connection Description window is displayed. b. Enter a name for the description, and click OK. The Connect To window is displayed. c.
Installing the IP Console Switch f. Select Option F (Hardware Flow Control). Be sure that the Change which setting? menu is configured as follows: A—Serial Device: /dev/ttyS0 B—Lockfile Location: /var/lock C—Callin Program: D—Callout Program: E—Bps/Par/Bits: 9600 8N1 F—Hardware Flow Control: No G—Software Flow Control: No g. Press the Enter key to return to the Configuration menu. Scroll down to the Save setup as dfl option, and press the Enter key. h.
Installing the IP Console Switch i. From the Linux Red Hat 7.2 and 7.3 command prompt, enter Minicom. As soon as a connection is established, the Main menu for the IP Console Switch is displayed. Follow the on-screen options to configure the IP Console Switch. The IPViewer HyperTerminal menu with six options is displayed. Figure 2-16: IPViewer HyperTerminal menu HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: c-ch2 Installing.
Installing the IP Console Switch 6. Select Option 1—Network Configuration. The Network Configuration menu is displayed. Figure 2-17: Network Configuration menu 7. Select Option 1 to set the network speed. When possible, set the connection manually without relying on the auto negotiate feature. After you enter your selection, you return to the Network Configuration menu. 8. Select Option 2 to specify a static or BootP IP address. Use a static IP address for ease of configuration.
Installing the IP Console Switch Adjusting the Mouse Acceleration Before a server can connect to the IP Console Switch, an adjustment to the mouse acceleration must be made. Use the default Microsoft Windows PS/2 mouse driver for all attached Microsoft Windows systems attached to the console switch.
Installing the IP Console Switch Adding Servers Although you configure the entire IP Console Switch system through either the OSD or the IP Console Viewer, HP recommends first adding server names to the OSD at the local analog station, before to adding or discovering the console switch in the IP Console Viewer at the digital station. To add server names: 1. Launch the OSD at the local analog station, and input all server names.
3 Expansion Module An optional Expansion Module can be added to the IP Console Switch system, enabling access for up to 8 servers on each port, increasing the total number of accessible servers to 128.
Expansion Module 1 2 100-2 40V , 1.0A , 50/60 T 2A, 250 VAC Hz CAUTION : For conti nued prote ction again st risk of fire, replace only with same type and 1 2 rating of fuse.
Expansion Module Installing the Expansion Module Hardware Performing a Side-Mount Installation To side mount an Expansion Module to the rack: 1. Slide the tabs on the side-mounting brackets into the rack frame. Figure 3-2: Sliding the tabs into the rack HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: d-ch3 Expansion Module.
Expansion Module 2. Secure the Expansion Module to the rack frame, using one self-tapping screw for the bottom side-mounting bracket. Figure 3-3: Inserting screw 3-4 HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: d-ch3 Expansion Module.
Expansion Module Performing a Rail-Mount Installation To rail mount an Expansion Module to the rack: 1. Remove screws securing the side-mounting brackets to the Expansion Module. Figure 3-4: Removing screws HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: d-ch3 Expansion Module.
Expansion Module 2. Position the Expansion Module, and insert two cage nuts into the rack frame where the mounting bracket holes are located (1). Secure the Expansion Module to the rack frame, using two M-6 screws (2). 1 2 1 2 Figure 3-5: Installing the Expansion Module 3-6 HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: d-ch3 Expansion Module.
Expansion Module Performing a Velcro-Mount Installation To Velcro mount an Expansion Module to the rack: 1. Determine the location for the Expansion Module. 2. Remove the protective strip (1) from the Velcro, and attach it to the Expansion Module. 3. Remove the protective strip (1) from the other side of the Velcro, and attach it to the rack frame (2). 1 1 2 Figure 3-6: Velcro-mounting the Expansion Module HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L.
Expansion Module Installing the Expansion Module into the IP Console Switch System To install an optional Expansion Module into the IP Console Switch system: 1. Mount the Expansion Module into the rack, using one of the previously described methods. 2. Locate up to nine UTP CAT5 cables. 3. Connect one end of a UTP CAT5 cable to the desired port on the rear panel of the IP Console Switch. 4. Attach the other end of the UTP CAT5 cable to the IN port on the Expansion Module. 5.
4 Interface Adapters An optional Interface Adapter can be added to the IP Console Switch system, connecting UTP CAT5 cables to standard VGA video and PS/2 connections.
Interface Adapters 1 100-2 T 2A, 40V , 1.0A, 250 VAC 50/60 Hz CAUT ION: For contin ued protec tion again st risk of fire, replac e only with same type and 1 2 rating of fuse. 3 4 5 6 7 8 9 10 11 12 13 14 15 16 2 3 4 5 Figure 4-1: IP Console Switch configuration with an Interface Adapter Item 4-2 Description 1 IP Console Switch 2 Interface Adapter 3 Video connector 4 Keyboard connector 5 Mouse connector HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L.
Interface Adapters Connecting an Interface Adapter to the IP Console Switch System To connect an Interface Adapter to each server: 1. Locate the Interface Adapter. 2. Attach the appropriate color-coded connectors on the Interface Adapter to the KVM ports on the server that connects to the IP Console Switch. 3. Connect one end of a UTP CAT5 cable to the desired port on the rear panel of the IP Console Switch. 4. Connect the other end of the UTP CAT5 cable to the RJ-45 connector on the Interface Adapter. 5.
5 Cascade Console Switches The IP Console Switch enables Compaq legacy console switches to be cascaded in the IP Console Switch system. Compatible models include: • 1 x 4 [PN: 400336 (-001)(-291)(-B31)] • 1 x 8 [PN: 400337 (-001)(-291)(B-31)] • 2 x 8 [PN: 400338 (-001)(-291)(B-31)] • 2 x 8 48VDC [PN: 400542-B21] IMPORTANT: All Compaq legacy console switches must be upgraded with SoftPaq firmware, version 2.1.0 or later.
Cascade Console Switches 1 100-240 V , 1.0A, T 2A, 250 VAC 50/60 Hz CAUTIO N: For continue d protectio n against risk of fire, replace only with same type and 1 2 rating 3 4 of fuse.
Cascade Console Switches Connecting Cascade Switches to the IP Console Switch System NOTE: You cannot access any servers on a cascaded Compaq legacy console switch remotely from the IP Console Viewer unless the IP Console Switch is in Free Mode. Free Mode can be achieved by pressing the Alt + 0 keys from the Main menu. If the IP Console Switch is not in Free Mode, the following message is displayed: is not available for viewing, Reason: Channel In Use By Local User.
6 Local Port Operation The IP Console Switch has a local port on the rear panel that enables the user to connect a KVM to the console switch for direct access. The IP Console Switch also uses an OSD that enables the user to configure the system. Viewing and Selecting Ports and Servers Use the OSD Main dialog box to view, configure, and control servers in the IP Console Switch system. You can also view your servers by name, port, or by the unique EID embedded in each Interface Adapter.
Local Port Operation Accessing the Main Dialog Box To access the Main dialog box: Press the Print Scrn key. The Main dialog box is displayed. NOTE: You can also press the Ctrl key twice within one second to launch the OSD. You can use this key sequence in any place you see Print Scrn throughout this user guide. Figure 6-1: Main dialog box 6-2 HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.
Local Port Operation Viewing the Status of your IP Console Switch System The status of the servers in your system is indicated in the right column of the Main dialog box. Table 6-1: OSD Status Symbols Item Description (green circle) Interface Adapter is connected or powered on. Interface Adapter is not connected or is powered off. Interface Adapter is tiered to another console switch and is not connected or is powered off.
Local Port Operation Selecting Servers From the Main dialog box, users can select specific servers. When a new server is selected, the IP Console Switch reconfigures the KVM to the settings for the selected server. To select servers: Double-click server Name, EID, or Port number. NOTE: The EID is an electronic identification number, found on the Interface Adapter cable label, automatically assigned to the Interface Adapter.
Local Port Operation Soft Switching Soft switching is the ability to switch servers, using a hotkey sequence. You can soft switch to a server by pressing the Print Scrn key and entering the first few characters of its name or number. If you have set a Screen Delay Time and you press the key sequences before that time has elapsed, the OSD does not display. Configuring Servers for Soft Switching To configure servers for soft switching: 1. Press the Print Scrn key. The Main dialog box is displayed. 2.
Local Port Operation Using Basic OSD Navigation The following table describes the keyboard and mouse OSD navigation keys. Table 6-2: OSD Navigation Keys Keystroke Function Print Scrn Opens the OSD. Press the Print Scrn key twice to send the Print Scrn keystroke to the currently selected device. F1 Opens the Help screen for the current dialog box. Esc Closes the current dialog box without saving changes and returns to the previous dialog box.
Local Port Operation Table 6-2: OSD Navigation Keys continued Keystroke Function Print Scrn, Backspace Toggles back to the previous selection if no other keystrokes have been entered. Print Scrn, Alt + 0 Immediately disengages user from a server—no server is selected. Status Flag displays Free. (This only applies to the 0 on the keyboard, not the keypad.) Print Scrn, Pause Immediately activates the screen saver mode and prevents access to that particular console, if it is password protected.
Local Port Operation Configuring the OSD Setup Menu You can configure the IP Console Switch from the Setup menu within the OSD. Select the Names button when initially setting up your console switch to identify servers by unique names. Select the other setup features to manage routine tasks for your servers from the OSD menu. Table 6-3: Features to Manage Routine Tasks for Servers Button Function Menu Changes the server listing between numerically by Port or EID number and alphabetically by name.
Local Port Operation Accessing the Setup Menu To access the Setup menu: 1. Press the Print Scrn key. The Main dialog box is displayed. 2. Click Setup. The Setup dialog box is displayed. Figure 6-2: Setup dialog box HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.
Local Port Operation Assigning Server Names Use the Names dialog box to identify individual servers by name rather than by port number. The Names list is always sorted by port order, and the names are stored in the Interface Adapter. If you move the Interface Adapter or server to another switch port, the IP Console Switch recognizes the names and configurations. NOTE: If a server is powered off, its respective Interface Adapter is not displayed in the Names list.
Local Port Operation Assigning Names to Servers To assign names to servers: 1. Press the Print Scrn key. The Main dialog box is displayed. 2. Click Setup, Names. The Names dialog box is displayed. 3. Select the name or port number, and click Modify. The Name Modify dialog box is displayed. Figure 6-4: Name Modify dialog box HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.
Local Port Operation 4. Enter a name in the New Name field. Names can be 1 to 15 characters in length. Permitted characters are case-sensitive and can consist of A–Z, 0–9, spacebar, and hyphen. 5. Click OK to transfer the new name to the Names dialog box. Changes made to the Names dialog box are not saved until you click OK. 6. Repeat steps 3 through 5 for each server in the system. 7. Click OK in the Names dialog box to save your changes.
Local Port Operation Accessing Devices Dialog Box To access the Devices dialog box: 1. Press the Print Scrn key. The Main dialog box is displayed. 2. Click Setup, Devices. The Devices dialog box is displayed. NOTE: The Modify button is only available if a configurable switch is selected. Figure 6-5: Devices dialog box When the IP Console Switch discovers a cascaded switch, the port numbering changes to accommodate each server under that switch.
Local Port Operation Assigning Device Types To assign a device type: 1. In the Devices dialog box, select the Port number. 2. Click Modify. The Device Modify dialog box is displayed. 3. Choose the number of ports supported by the cascaded console switch. 4. Click OK. 5. Repeat steps 2 through 4 for each port the user wants to assign a device type. 6. Click OK in the Devices dialog box to save settings.
Local Port Operation Changing the Display Behavior From the Menu dialog box, the display order of servers, switch connection mode, and a time to delay display of the OSD after pressing the Print Scrn key can be changed. The display order setting alters how servers display in several screens, including the Main, Devices, and Broadcast dialog boxes. Accessing the Menu Dialog Box To access the Menu dialog box: 1. Press the Print Scrn key. The Main dialog box is displayed. 2. Click Setup.
Local Port Operation Selecting the Display Order of Servers To choose the display order of servers: 1. From the Menu dialog box, select Name to display servers alphabetically by name. -orSelect EID to display servers numerically by Interface Adapter ID number. -orSelect Port to display servers numerically by port number. 2. Click OK. Setting Screen Delay Time Setting a time to delay the display of the OSD enables you to complete a soft switch without displaying the OSD.
Local Port Operation Controlling the Status Flag The status flag is displayed on the desktop and shows the Name or EID number of the selected server or the status of a particular port. Use the Flag dialog box to change the flag display by server Name or EID number or to change the flag color, opacity, display time, and location on the desktop.
Local Port Operation Accessing the Flag Dialog Box To access the Flag dialog box: 1. Press the Print Scrn key. The Main dialog box is displayed. 2. Click Setup. The Setup dialog box is displayed. 3. Click Flag. The Flag dialog box is displayed. Figure 6-8: Flag dialog box 6-18 HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.
Local Port Operation Displaying the Status Flag To determine how the status flag is displayed: 1. Select Name or EID to determine what information is displayed. 2. Select Displayed to show the flag constantly or select Timed to display the flag for only five seconds after soft switching. 3. Select a flag color in Display Color. 4. In the Display Mode, select Opaque for a solid color flag or select Transparent to see the desktop through the flag. 5. Position the status flag on the desktop: a.
Local Port Operation Broadcasting to Servers Analog users can simultaneously control more than one server in a system to be sure that all selected servers receive identical input. For each server receiving the broadcast, you can choose to broadcast keystrokes and/or mouse movements independently. NOTE: You can broadcast to only one server per Expansion Module connection.
Local Port Operation Accessing Broadcast Dialog Box To access the Broadcast dialog box: 1. Press the Print Scrn key. The Main dialog box is displayed. 2. Click Setup, Broadcast. The Broadcast dialog box is displayed. Figure 6-10: Broadcast dialog box HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.
Local Port Operation Broadcasting Selected Servers To broadcast selected servers: 1. From the Broadcast dialog box, select the keyboard and mouse checkboxes for the servers that are to receive the broadcast commands. -orPress the Up or Down Arrow keys to move the cursor to the target server. Then press the Alt + K keys to select the keyboard checkbox and/or the Alt + M keys to select the mouse checkbox. Repeat for additional servers. 2. Click OK to save the settings and return to the Setup dialog box.
Local Port Operation Accessing the Scan Dialog Box To access the Scan dialog box: 1. Press the Print Scrn key. The Main dialog box is displayed. 2. Click Setup, Scan. The Scan dialog box is displayed. Figure 6-11: Scan dialog box HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.
Local Port Operation Adding Servers to the Scan List To add servers to the Scan list: 1. The Scan dialog box contains a list of all the servers attached to your unit. Click the checkbox next to the servers you want to scan. -orDouble-click a server name or port. -orPress the Alt key plus the number of the server you want to scan. You can select up to 16 servers. 2. In the Scan Time box, enter the number of seconds (from 3 to 99) before the scan moves to the next server in the sequence. 3. Click OK.
Local Port Operation Starting Scan Mode To start the Scan mode: 1. Select Scan Enable in the Commands menu. 2. Click X to close the Commands dialog box. NOTE: The scanning begins as soon as you click Scan. Stopping Scan Mode To stop Scan mode: If the OSD is open, select a server. -orIf the OSD is not open, move the mouse or press any key on the keyboard. Scan mode stops at the currently selected server. -orDeselect Scan Enable in the Commands menu.
Local Port Operation Accessing the Security Dialog Box To access the Security dialog box: 1. Press the Print Scrn key. The Main dialog box is displayed. 2. Click Setup. The Setup dialog box is displayed. 3. Click Security. The Security dialog box is displayed. Figure 6-12: Security dialog box 6-26 HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.
Local Port Operation Changing the Password To set or change the password: 1. From the Security dialog box, single-click in the New field and press the Enter key if the OSD is not open, or double-click the New field. 2. Enter the new password in the New field, then press the Enter key. IMPORTANT: A valid password must be alphanumeric and be 5 to 15 characters in length. Permitted characters are case-sensitive and can consist of A–Z, 0–9, spacebar, and hyphen. 3.
Local Port Operation Logging on to Switch To log on to the IP Console Switch: 1. Press any key on the keyboard, or move the mouse. The Password dialog box is displayed. Enter the password, then click OK. 2. Press the Print Scrn key. Removing Password Protection To remove the password protection from the IP Console Switch: 1. From the Main dialog box, click Setup, Security. The Password dialog box is displayed. Enter the password, then click OK. 2.
Local Port Operation 3. Enter the number of minutes for Inactivity Time (1 to 99) to delay activation of the screen saver. 4. Select Energy if your monitor is Energy Star compliant. Otherwise, select Screen. CAUTION: Monitor damage can result from the use of energy mode with monitors not compliant with Energy Star. 5. (Optional) Click Test to activate the screen saver test, which lasts 10 seconds, then returns you to the Security dialog box. 6. Click OK.
Local Port Operation Managing Server Tasks Using the OSD You can manage the IP Console Switch system from the Commands menu with the OSD, including engaging Scan and Broadcast modes, managing user connections, running diagnostics, and updating your firmware. Table 6-5: Commands to Manage Routine Task for your Servers 6-30 Feature Purpose Broadcast Enable Begin broadcasting to your servers. Configure a server list for broadcasting under the Setup dialog box. Scan Enable Begin scanning your servers.
Local Port Operation Accessing the Commands Menu To access the Commands menu: 1. Press the Print Screen key. The Main dialog box is displayed. 2. Click Commands. The Commands dialog box is displayed. Figure 6-13: Commands dialog box HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.
Local Port Operation Viewing and Disconnecting User Connections You can view and disconnect remote network users through the User Status dialog box. The user name (U) is always displayed. However, either the server name or Interface Adapter ID number to which the user is connected can also be displayed. The User Status dialog box displays only the number of users the system supports. If there are no users are currently connected to a channel, the fields are blank and the server indicates it is free.
Local Port Operation Disconnecting a User To disconnect a user: 1. Press the Print Scrn key. The Main dialog box is displayed. 2. Click Commands, User Status. The User Status dialog box is displayed. Figure 6-14: User Status dialog box HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.
Local Port Operation 3. Click the letter of the user to be disconnected. The Disconnect dialog box is displayed. Figure 6-15: Disconnect dialog box 4. Click OK to disconnect the user and return to the User Status dialog box. -orClick X to exit, or press the Esc key to exit the dialog box without disconnecting a user. NOTE: If the User Status dialog box has changed since it was last displayed, the mouse cursor becomes an hourglass as the list automatically updates.
Local Port Operation Running System Diagnostics You can validate the integrity of your system with the Run Diagnostics command. This command checks the main board functions subsystems (memory, intra-board communications, console switch control, and the video channels) for each system controller. When you select Run Diagnostics, you receive a warning indicating that all users (remote and local) will be disconnected. Click OK to confirm and begin the test.
Local Port Operation 3. Click Run Diagnostics. A warning message is displayed, indicating that all users will be disconnected. Figure 6-16: Diagnostics Warning 4. Click OK to begin. –orClick X, or press the Esc key to exit the dialog box without running a diagnostic test. 6-36 HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.
Local Port Operation 5. All users are disconnected, and the Diagnostics dialog box is displayed. Figure 6-17: Diagnostics dialog box Test Description Memory Test Reports the condition of the main board RAM. This indicator displays the results of the memory tests performed at system reboot. Firmware CRC Validates the current firmware images stored in the system’s FLASH by comparing a CRC value on each image and comparing those results to the expected values.
Local Port Operation Figure 6-17: Diagnostics dialog box continued 6-38 Test Description Switch Controller Verifies the switch matrix controller is accessible and functional by querying the switch matrix controller and performing basic register level tests. Local and Remote User Video Verifies that all the video channel subsystems are accessible, functional, and performing basic register level tests.
Local Port Operation 6. As each test is finished, a pass or fail symbol is displayed. A passed test is indicated with a green circle, a failed test is indicated by a red X, and the LAN connection has a third indicator, which indicates that the LAN connection is functional but no network traffic has been received. The test is complete when the last test’s symbol displays. 7. (Optional) If you have any offline Interface Adapters, you can click the Clear button to remove them from the list. 8.
Local Port Operation Resetting the PS/2 Mouse If your PS/2 mouse locks up, you can re-establish operation of these peripherals by issuing a reset command. The reset command sends a key sequence to the server, which causes the mouse settings to be sent to the console switch. With communication reestablished between the server and the console switch, functionality is restored to the user. NOTE: This function is for Microsoft Windows-based computers only.
Local Port Operation Displaying Version Information The Version dialog box enables you to view IP Console Viewer versions, as well as keyboard and mouse information for the currently selected server. For optimum performance, keep your firmware current. NOTE: Provide the application version number, Figure 6-20, when communicating with HP customer service centers. To display version information: 1. Click Version in the Commands dialog box. The Version dialog box is displayed.
Local Port Operation 2. Click Digital to view the IP Console Viewer versions. The Digital Version dialog box is displayed. The top section identifies the digitizer subsystem versions. The center section identifies the current network settings. NOTE: Provide the application version number, Figure 6-20, when communicating with HP customer service centers. Figure 6-21: Digital Version dialog box 6-42 HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L.
Local Port Operation -orClick IA to access the IA Selection dialog box to view individual Interface Adapter cable version information. The IA Selection dialog box is displayed. Figure 6-22: IA Selection dialog box HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.
Local Port Operation 3. To view the selected Interface Adapter cable, click Version. The IA Version dialog box is displayed. NOTE: Provide the application version number, Figure 6-19, when communicating with HP customer service centers. Figure 6-23: IA Version dialog box 4. Click X to exit. 6-44 HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.
7 Upgrading Firmware using TFTP The HP IP Console Switch FLASH upgrade feature enables you to update the IP Console Switch with the latest available firmware. To update the IP Console Switch, you need a Trivial File Transfer Protocol (TFTP) server on the terminal or PC that performs upgrades. After the TFTP has been enabled, upgrade the FLASH firmware, then upgrade the IP Console Switch firmware. Enabling TFTP for Windows NT To enable TFTP for Windows NT: 1. Unzip NT_TFTP3.3.ZIP into an empty directory.
Upgrading Firmware using TFTP Enabling TFTP for Windows 2000 and Windows XP To enable TFTP for Windows 2000 and Windows XP: 1. Unzip W2K_TFTP3.3.ZIP into an empty directory. 2. From the Start menu, select Settings, Control Panel. 3. Double-click Add/Remove Programs. 4. Click Add New Programs, CD or Floppy. Follow the on-screen instructions in the Install Program From Floppy Disk or CD-ROM Wizard. 5. In the Open box on the Run Installation Program page, enter the path to the location of the extracted files.
Upgrading Firmware using TFTP Enabling TFTP for Linux For most systems using RPM packages, TFTP is provided by the TFTP server RPM (RPM-IVH/Redhat/RPMS/). Depending on the type of distribution, the Internet services daemon is provided by xinetd. NOTE: By default, TFTP executes in secure mode and only provides readable files under the /tftpboot directory. Other directories can be specified through the /etc/xinetd.d/tftp files. In secure mode, TFTP expects the file to be relative to the /tftpboot directory.
Upgrading Firmware using TFTP Configuring TFTP for Windows To configure TFTP for Windows operating systems: 1. Access the Secure TFTP Service page. Windows NT 4.0 a. From the Start menu, select Settings, Control Panel. b. Double-click Network. c. Click Services. d. From the Network Services list, select Secure TFTP Service and click Properties. The Secure TFTP Service window is displayed. Windows 2000 or Windows XP a. From the Start menu, select Run. b.
Upgrading Firmware using TFTP 2. You can use the default settings for the directory with the GET access or PUT access rights set as indicated in the following procedure. To use the default settings, select Use Default Settings, then click Exit. To customize settings, select Customize Settings. a. To add directories, click Add. The Secure TFTP Directory dialog box is displayed. b. Enter the path name of the directory, or click Browse, select a directory, and then click OK. c.
Upgrading Firmware using TFTP 3. To change an existing entry in the directory list, select the directory name in the Path column. a. To delete the entry, click Remove, then click Exit. b. To modify an entry’s access rights, select the appropriate checkbox in the GET or PUT columns. c. To modify an entry’s pathname, click Modify, then enter the pathname of the desired directory, or click Browse to select a directory. d. Click Exit, then click Close.
Upgrading Firmware using TFTP 5. Configure the terminal emulation software for the server, such as HyperTerminal for Windows operating systems or Minicom for Linux operating systems. To configure HyperTerminal: a. From the desktop screen, click Start, Programs, Accessories, Communications, HyperTerminal. The Connection Description window is displayed. b. Enter a name for the description, and click OK. The Connect To window is displayed. c.
Upgrading Firmware using TFTP To configure Minicom: IMPORTANT: Minicom is a utility that is loaded during the installation of Red Hat 7.2 and 7.3. However, if you do not select the option to install the Linux Utilities during the operating system installation, you are not able to use Minicom without downloading the Minicom 1.831-16.i386.rpm file from the Red Hat website. (Refer to the procedure for installing RPMs on the Red Hat website). a.
Upgrading Firmware using TFTP i. From the Linux Red Hat 7.2 and 7.3 command prompt, enter Minicom. As soon as a connection is established, the Main menu for the IP Console Switch is displayed. Follow the on-screen options to configure the IP Console Switch. The IPViewer HyperTerminal menu with six options is displayed. Figure 7-3: IPViewer HyperTerminal menu HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: h-ch7 TFTP Downloads.
Upgrading Firmware using TFTP 6. Select Option 2—Firmware Management. The Firmware Management menu is displayed. Figure 7-4: Firmware Management menu 7-10 HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: h-ch7 TFTP Downloads.
Upgrading Firmware using TFTP 7. Select Option 1—Flash Download. 8. Enter the IP address of the TFTP server that has the updated file and the exact path of the updated file (for example, C:\Download\HP\FL0109.fl). 9. Enter Y at the prompt to download the upgrade file from the given IP address. The IP Console Switch begins upgrading. CAUTION: Do not cycle power to the IP Console Switch during this process.
Upgrading Firmware using TFTP Updating the IP Console Switch through the IP Console Viewer 1. Select the IP Console Switch, and click the Manage Console Switch icon. The IP Console Viewer window is displayed. Figure 7-5: IP Console Viewer window 7-12 HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: h-ch7 TFTP Downloads.
Upgrading Firmware using TFTP 2. Select the Tools tab, and click the Upgrade Console Switch Firmware icon. Figure 7-6: Tools tab HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: h-ch7 TFTP Downloads.
Upgrading Firmware using TFTP 3. (Optional) Enter in the IP address of the computer the update is located on in the TFTP Server IP Address: field. 4. (Optional) Enter in the complete path of the update file in the Firmware Filename: field (for example, C:\Download\HP\FL0109.fl). NOTE: For Linux operating systems a path name is not required; however, the firmware images should be saved in the TFTPBoot folder.
Upgrading Firmware using TFTP 5. Click Upgrade. CAUTION: Do not cycle power to the IP Console Switch during this process. A loss of power might render the IP Console Switch inoperable and require that the unit be returned to the factory for repair. Be patient; the update can take as long as 10 minutes. Figure 7-8: Upgrade Console Switch Firmware warning 6. After the upgrade completes, click Close to reboot the IP Console Switch. 7. After rebooting, the message Firmware Upgrade has completed.
Upgrading Firmware using TFTP Establishing LAN Connections To connect an IP Console Switch to a network: NOTE: Although 10Base-T Ethernet can be used, HP recommends a dedicated, switched 100Base-T network for improved performance. Connect the network cable from the LAN port on the rear panel of the IP Console Switch to the network, then power on all attached systems. The current IP Console Switch system open network ports are 2068, 8192, 3211, and 161.
Upgrading Firmware using TFTP 6. Get the IP address of the TFTP server by extracting it from the operating system tools (might be operating system-dependent): a. Right-click Network Neighborhood. b. Select Properties. c. Select the Protocols tab. d. Select TCP/IP protocol. e. Select Properties. f. Note the IP address. 7. Assign the IP address in the IP Console Switch, if needed: a. In the IPViewer HyperTerminal dialog box, enter 1 to select Network Configuration. b.
Upgrading Firmware using TFTP 12. Confirm the TFTP download by entering y or yes and pressing the Enter key. 13. The IP Console Switch verifies the download. Enter y or yes to confirm the upgrade, then press the Enter key. 14. The IP Console Switch begins the FLASH upgrade process. On-screen indicators display the upgrade process. When the upload is complete, the IP Console Switch resets and upgrades the internal subsystems. This process takes a few minutes.
Upgrading Firmware using TFTP Upgrading Interface Adapter Firmware CAUTION: If a local port user has access to a specific Interface Adapter, a remote user can obstruct the local port user’s access by performing an Interface Adapter firmware upgrade. To upgrade Interface Adapter firmware simultaneously: 1. Press the Print Scrn key. The Main dialog box is displayed. 2. Click Commands. The Commands dialog box is displayed. 3. Click IA Status. The IA Status dialog box is displayed.
Upgrading Firmware using TFTP 4. Select the PS/2 checkbox, then click Upgrade. The IA Upgrade dialog box is displayed. Figure 7-10: IA Upgrade dialog box 5. Click OK. 6. Press the Esc key to return to the Main dialog box. The OSD IP Console Switch indicators are displayed as (yellow) while the upgrade is in progress. The OSD IP Console Switch indicators changes to the upgrade is complete. and then to NOTE: Wait until the OSD IP Console Switch indicators are displayed as before continuing.
Upgrading Firmware using TFTP To upgrade Interface Adapter firmware individually: 1. Click Version in the Commands dialog box. The Version dialog box is displayed. NOTE: Provide the application version number, Figure 7-11, when communicating with HP customer service centers. Figure 7-11: Version dialog box HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: h-ch7 TFTP Downloads.
Upgrading Firmware using TFTP 2. Click IA. The IA Selection dialog box is displayed. Figure 7-12: IA Selection dialog box 7-22 HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: h-ch7 TFTP Downloads.
Upgrading Firmware using TFTP 3. Select the individual Interface Adapter, and click Version. The IA Version dialog box is displayed. NOTE: Provide the application version number, Figure 7-11, when communicating with HP customer service centers. Figure 7-13: IA Version dialog box 4. Click Load Firmware. HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: h-ch7 TFTP Downloads.
8 Troubleshooting Table 8-1: Troubleshooting Problem Solution The local user cannot view the IP Console Switch on-screen copyright notice. • Be sure that the power source is valid. • Be sure that the cables are connected properly. • Be sure that the monitor is valid. • Be sure that the power source is valid. • Be sure that the cables are connected properly. • Be sure that the monitor is valid. IP Console Switch on-screen copyright notice is distorted. Local user cannot view OSD flag.
Troubleshooting Table 8-1: Troubleshooting continued Problem Solution The green activity indicator does not display when the console switch is powered on. • Be sure that the console switch is powered on and that the power source is valid. • Be sure that the cables are connected properly.
A Regulatory Compliance Notices Regulatory Compliance Series Number For the purpose of regulatory compliance certifications and identification, your product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to this series number. The series number is not the marketing name or model number of the product.
Regulatory Compliance Notices The FCC rating label on the device shows the classification (A or B) of the equipment. Class B devices have an FCC logo or FCC ID on the label. Class A devices do not have an FCC logo or FCC ID on the label. After the Class of the device is determined, refer to the corresponding statement in the following sections. Class A Equipment This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
Regulatory Compliance Notices Declaration of Conformity for Products Marked with the FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding your product, contact us by mail or telephone: • Hewlett-Packard Company P.O.
Regulatory Compliance Notices Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods in order to maintain compliance with FCC Rules and Regulations. Canadian Notice (Avis Canadien) Class A Equipment This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Regulatory Compliance Notices European Union Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Regulatory Compliance Notices Japanese Notice BSMI Notice A-6 HP IP Console Switch User Guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: j-appa Regulatory Compliance Notices.
B Electrostatic Discharge Preventing Electrostatic Damage A discharge of static electricity from a finger or other conductor can damage system boards or other static-sensitive devices. This type of damage can reduce the life expectancy of the device. To prevent electrostatic damage when setting up the system or handling parts: • Avoid hand contact by transporting and storing products in static-safe containers.
Electrostatic Discharge Grounding Methods To Prevent Electrostatic Damage There are several methods for grounding. Use one or more of the following methods when handling or installing electrostatic-sensitive parts: • Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist straps are flexible straps with a minimum of 1 megohm ± 10 percent resistance in the ground cords. To provide proper ground, wear the strap snug against the skin.
C Power Cord Set Requirements The power cord set meets the requirements for use in the country where you purchased your equipment. The voltage selection switch enables you to select the appropriate line voltage for your server. Power cord sets for use in other countries must meet the requirements of the country where you use the server. For more information on power cord set requirements, contact your HP authorized dealer.
Power Cord Set Requirements Country-Specific Requirements Use Table C-1 to identify the appropriate accredited agency in your country.
Index Symbols and Numbers C 2 x 8 Compaq legacy console switch 5-3 accessing Broadcast dialog box 6-21 Commands menu 6-31 Devices dialog box 6-13 Diagnostics dialog box 6-36 Flag dialog box 6-18 Main dialog box 6-2 Menu dialog box 6-15 Names dialog box 6-10 Scan dialog box 6-23 Security dialog box 6-26 Setup menu 6-9 Version dialog box 6-41 activity indicator 1-4, 2-3 adding servers 2-20 adjusting the mouse acceleration 2-19 authorized reseller xiii cables FCC compliance statement A-4 cascading console
Index disconnecting from server 6-4 remote users 6-32 E electrostatic damage B-1 enabling TFTP 7-1 Ethernet connections 7-16 networking 1-1 Expansion Module broadcasting 6-20 cascading 5-1 features 3-1 hardware configuration 3-2 installing 3-3, 3-8 F FCC notices Class A Equipment A-2 Class B Equipment A-2 classification label A-1 Declaration of Conformity A-3 device modifications A-3 mouse A-4 features Expansion Module 3-1 Interface Adapter 4-1 switch 1-2 Federal Communications Commission notices See FCC
Index K O Keep Alive function 4-1 keyboard broadcasting keystrokes 6-20 connector location 1-4, 1-5 resetting 6-40 kit contents 2-2 optional items 2-2 OSD (on-screen display) broadcasting to servers 6-20 changing 6-15 configuring 6-8 device type assignment 6-12 navigation keys 6-6 remote users 6-32 scan patterns 6-22 server name assignment 6-10 status flag control 6-17 version information 6-41 viewing/selecting ports/servers 6-1 L LAN (local area network) connecting to 7-16 connector location 1-4 legac
Index R rack Expansion Module installation 3-3 rear rack installation 2-8 side-mounting switch 2-4 standard 1U installation 2-10 rail-mount installation 3-5 rear rack installation 2-8 Red Hat Linux 2-15, 7-8 regulatory compliance notices BSMI A-6 cables A-4 Canadian A-4 Class A equipment A-2 Class B equipment A-2 device modifications A-3 European Union A-5 Japanese A-6 mouse compliance statement A-4 remote users 6-32 removing password protection 6-28 required components 2-2 resetting PS/2 6-40 resolution 1
Index V W Velcro-mount installation 3-7 version information 6-41 video connector 1-5 wall plug specifications C-2 websites, HP xiii HP IP Console Switch User guide HP CONFIDENTIAL Writer: Amy L. Laffitte File Name: x-index.