Instruction Manual

Password options
The passw ord en
try options are:
• Enteringapasswordduringstoragesysteminitialization(seeSetting Up an HSV110-Series
ControllerPairUsingtheOCP).
• Showing the cur
rent password. The actual password is not displayed, instead an indicator informs
you of whether
a password h as been set.
• Changing a password (see Changing a Password).
• Removing password protection (see Clearing a Passwor d).
Changing a password
For security reasons, you may need to change a storage system password. First you must select a new,
unique, eight-character password, using the uppercase let ters A through Z and the lowercase letters a
through z.
After selecting the new password, use the following procedure to change the password.
NOTE:
Changing a system password on the controller requires changing the password on any Command
ViewEVAwithaccesstothissystem.
1. Press to scroll to the System Password menu.
2. Press
to select the System Password menu.
3. Press
to select Change Password
OR
press
to go to Shutdown Options.
4. Press
to select , CHANGE PASSWORD NO
OR
press
to scroll to Clear Password.
5. Press
to accept NO
OR
press
to scr oll to CHANGE PASSWORD YES.
6. Press
to accept YES
OR
press
to scroll to CHANGE PASSWORD NO.
7. To enter the first character, press either
or to select an uppercase or lowercase character.
Press
to accept a character and select the next password character. The character display
changes to an asterisk.
8. Repeat step 7 for the remaining seven characters.
Press
to accept the password a nd go to CHANGE PASSWORD YES.
9. Press
to go to computeroutput>S ystem Password.
10. The system will automatically return to the default display.
102
Storage system hardware components