Instruction Manual
Fibre Channel sw
itch specifications
The Fibre Chann
el Switch requires a clean, dry environment for normal operation. Table 38 lists the
specifications for the Fibre Channel Switch.
Table 38 Fibre Channel switch specifications
Category
Measurement
Weight approximately 7.5 lbs.
Dimensions
8.50x1.57x16.00in(WxHxD)theswitchwithextenderis21.66
in D
Operating Temperature
0°Cto40°Cfornormaloperation(ambientairtemperature)
Storage Temperature
-40°Cto80°Cnoncondensing
Power
50 or 60 Hz 100–250 VAC 0.5–0.3 A
Controller specifications
This section defines the physical, power, and environmental specifications of the Controller enclosure.
Physical specifications
??? defines the dimensions of the contr
oller.
Table 39 Controller enc losure physical specifications
Specification
Installed Shipping
Height
62 mm (2.45 in)
26 7 mm ( 1 0.5 in)
Width
502mm(19.56in) 762mm(30in)
Depth
444 mm (17.49 in)
762 mm (30 in)
Weight 10.4 kg (23 lb) 12.7 kg (28 lb)
NOTE:
Metric dimensions are expressed in whole numbers. For example, 10.795 cm is expressed as 108 mm.
Power specifications
Table 40 and Table 37 define the HSV110 Controller power supply input power requirements and
output power specifications.
Table 40 Controller power supply AC power requirements
AC input voltage
Frequency
Minimum
Nominal
Maximum Minimum
Nominal
Maximum
180 VAC 202 VAC 220 V AC 4 7 Hz
50 Hz 53 Hz
208 VAC
57 Hz
60 Hz 63 Hz
208VAC 240VAC 254VAC
Table 41 defines the AC input current and wattage to the controller power supplies.
Enterprise Virtual Array 3000/5000 user guide (VCS 3.110)
129