Instruction Manual

Show iSNS command
Displays iSNS configuration information for the specified iSCSI port. If the port is not specified, the
iSNS configuration information for both iSCSI ports is displayed.
NoneAuthority
show isns [<port num>]Syntax
port_num: The iSCSI port number whose iSNS configuration is to be
displayed.
Parameters
The following is an example of the Show iSNS command:
mpx100 #> show isns
iSNS Information
------------------
iSCSI Port 1
iSNS Disabled
IP Address 0.0.0.0
TCP Port No. 3205
iSCSI Port 2
iSNS Disabled
IP Address 0.0.0.0
TCP Port No. 3205
Examples
Show LUNs command
Displays LUN information for each target.
NoneAuthority
show lunsSyntax
Command line interface164