Instruction Manual

show presented_targets
fc
iscsi
Syntax
fc: Specifies the display of FC-presented targets.
iscsi: Specifies the display of iSCSI-presented targets.
Keywords
The following is an example of the show presented targets FC
command:
mpx100 #> show presented_targets fc
No Presented Targets found.
The following is an example of the Show Presented Targets
iSCSI command:
mpx100 #> show presented_targets iscsi
Presented Target Information
------------------------------
iSCSI Presented Targets
-------------------------
Name iqn.2000-04.com.hp:mpx100:0.50001fe150069d20.50001fe150069d2c
IP 10.3.5.66
CHAP Disabled
WWNN 50:00:1f:e1:50:06:9d:20
WWPN 50:00:1f:e1:50:06:9d:2c
Name iqn.2000-04.com.hp:mpx100:1.50001fe150069d20.50001fe150069d2c
IP 10.3.5.67
CHAP Disabled
WWNN 50:00:1f:e1:50:06:9d:20
WWPN 50:00:1f:e1:50:06:9d:2c
Name iqn.2000-04.com.hp:mpx100:0.50001fe150011150.50001fe150011158
IP 10.3.5.66
CHAP Disabled
WWNN 50:00:1f:e1:50:01:11:50
WWPN 50:00:1f:e1:50:01:11:58
Name iqn.2000-04.com.hp:mpx100:1.50001fe150011150.50001fe150011158
IP 10.3.5.67
CHAP Disabled
WWNN 50:00:1f:e1:50:01:11:50
WWPN 50:00:1f:e1:50:01:11:58
Examples
Show SNMP command
Displays the router’s SNMP properties and any traps that have been configured.
NoneAuthority
EVA iSCSI Connectivity User Guide 167