User Manual

Storage System Hardware Components
117Enterprise Virtual Array 3000 User Guide
Displaying System Information
Note: This information is intended to assist an HP authorized service representative
when servicing the storage system.
The System Information menu displays configuration information including the
VCS version, the OCP firmware and application programming interface (API)
versions, and the enclosure address bus programmable integrated circuit (PIC)
configuration. You can only view this information—you cannot change it.
Table 24 defines the pushbutton functions in the system information menu.
Displaying Versions System Information
When you press T, the active display is Versions. From the Versions display you
can determine the:
■ VCS revision level
■ OCP firmware revision level
Table 24: System Information pushbutton functions
Button Function
T
■ Moves from the Versions VCS display to the Versions OCP display
■ Moves from the Versions OCP display to the Versions Address Bus
PIC display
S
■ Moves from the Versions OCP display to the Versions VCS display
■ Moves from the Versions PIC display to the Versions OCP display
X
■ Moves from the System Information display to the Versions VCS
display
■ Moves from the Versions VCS display to the VCS detail display
■ Moves from the Versions OCP display to the OCP detail display
■ Moves from the Versions PIC display to the detailed PIC display
W
■ Moves from the System Information display to the default display
■ Moves from the Versions display to the System Information display
■ Moves from VCS detail display to the Versions VCS display
■ Moves from the OCP detail display to the Versions OCP display
■ Moves from the PIC detail display to the Versions PIC display