User Manual

Storage System Hardware Components
122 Enterprise Virtual Array 3000 User Guide
Powering Off the Storage System
Use the following procedure to remove power from the storage system. All data in
cache is saved to disk before power is removed. Because the storage system is
powered off, it can no longer communicate with Command View EVA.
Note: Implementing this procedure removes power from the controller pair and all
associated drive enclosures. To restore power to the controller system, you must cycle
both PDU breakers in the enclosure.
1. From the OCP menu tree, select Shutdown
System.
Shutdown System
System Password
2. Press
T to make Power Off the active
display.
Restart
Power Off
3. Press
X to select Power Off.
Restart
Power Off
4. Press
T and go to step 5.
Press
W to accept NO and return to Step 3
POWER OFF SYSTEM
NO
5. Press
W to accept YES and initiate the
power off sequence.
POWER OFF SYSTEM
YES