Instruction Manual

PIM-SM (Sparse Mode)
Configuring PIM-SM on the Router
Configuring PIM-SM on the Router
Command Page
Global Context Commands
[no] ip routing 4-26
[ no ] ip multicast-routing 4-26
[no] router < rip | ospf > 4-26
[no] ip route < src-ip-addr/mask >< dest > 4-26
[no] router pim 4-26
VLAN context 4-28
[no] ip igmp 4-28
ip pim-sparse
4-29
[ip-address]
4-33
hello-interval
4-30
hello-delay
4-31
nbr-timeout
4-32
lan-prune-delay
4-32
override-interval
4-33
propagation-delay
4-33
dr-priority
4-33
router pim Context 4-35
bsr-candidate source-ip-vlan
4-35
bsr-candidate
4-35
priority
4-36
hash-mask
4-36
bsm-interval
4-37
rp-candidate source-ip-vlan 4-38
rp-candidate 4-40
group-prefix 4-40
hold-time 4-40
priority 4-41
trap 4-41
ip pim-sparse spt-threshold 4-42
rp-address 4-43
4-25