- Xerox 3535 printer/copier user guide
Table Of Contents
- Electrical Safety
- Laser Safety
- Maintenance Safety
- Operational Safety
- Ozone Safety
- Radio Frequency Emissions
- Safety Extra Low Voltage Approval
- Certifications in Europe
- It’s Illegal in the USA
- It’s Illegal in Canada
- Environmental Notices for the USA
- Environmental Notices for Canada
- Product Recycling and Disposal
- Symbols
- Getting to Know Your Copier
- Quick Start Guide to Copying
- Copier Features
- Duplex Automatic Document Feeder (DADF)
- Job Status
- Machine Status
- Overview
- Overview
- How to Scan
- Creating Job Templates
- Scanning Features
- How to Pause or Cancel a Scanning Job
- Scanning in Batches
- Managing Scanned Documents
- Configuring the Client for Scanning
- Overview
- System Settings
- Setting and Changing the Administrator Password
- Entering and Exiting the System Settings Mode
- Changing Settings in System Settings Mode
- Common Settings
- Copy Mode Settings
- Network Settings
- Scan Mode Settings
- Auditron Administration
- Loading Paper
- Machine Specifications
- Finisher (Optional Accessory)
- Ordering Consumables
- Cleaning the DADF and Document Glass
- Cleaning the ROS Window
- Changing Toner Cartridges
- Changing Staple Cartridges
- Changing the Fuser
- Changing the Waste Toner Container
- Changing Drum Cartridges
- Paper Jam Clearance
- Document Jams
- Stapler Faults
- Resolving Hardware Problems
- Resolving Programming Problems
- Resolving Processor Problems
- Resolving Output Problems using Basic Copying, Added Features, and Image Quality Tabs
- Calling for Service
- Fault Codes
TABLE OF CONTENTS
Xerox DocuColor 3535 Printer/Copier
vi
Tray 5 (Bypass) 5–3
Auto Tray Switching 5–3
Loading Stock 5–4
Machine Specifications 5–12
Speed by Media 5–12
Dimensions and Weight 5–13
Finisher (Optional Accessory) 5–14
Using the Finisher 5–14
Maintenance 6–1
Ordering Consumables 6–2
Cleaning the DADF and Document Glass 6–3
Cleaning the ROS Window 6–4
Changing Toner Cartridges 6–7
Changing Staple Cartridges 6–10
Changing the Fuser 6–11
Changing the Waste Toner Container 6–14
Changing Drum Cartridges 6–16
Troubleshooting 7–1
Paper Jam Clearance 7–2
Paper Jams at the Top Left Cover 7–3
Paper Jams at the Left Center Cover 7–4
Paper Jams at the Bottom Left Cover 7–4
Paper Jams in Trays 1 to 4 7–5
Paper Jams in Tray 5 (Bypass) 7–5
Paper Jams in the Duplex Unit 7–6
Paper Jams in the Finisher 7–6
Document Jams 7–8
Document Jams on the Left Cover (Top) 7–8
Jams on Original Input Area and Document Glass 7–9
Stapler Faults 7–10
Resolving Hardware Problems 7–11
Toner Cartridge 7–11
Resolving Programming Problems 7–12
Resolving Processor Problems 7–13
Resolving Output Problems using Basic Copying, Added Features,
and Image Quality Tabs 7–16
Calling for Service 7–20
Fault Codes 7–21