- Xerox 3535 printer/copier user guide
Table Of Contents
- Electrical Safety
- Laser Safety
- Maintenance Safety
- Operational Safety
- Ozone Safety
- Radio Frequency Emissions
- Safety Extra Low Voltage Approval
- Certifications in Europe
- It’s Illegal in the USA
- It’s Illegal in Canada
- Environmental Notices for the USA
- Environmental Notices for Canada
- Product Recycling and Disposal
- Symbols
- Getting to Know Your Copier
- Quick Start Guide to Copying
- Copier Features
- Duplex Automatic Document Feeder (DADF)
- Job Status
- Machine Status
- Overview
- Overview
- How to Scan
- Creating Job Templates
- Scanning Features
- How to Pause or Cancel a Scanning Job
- Scanning in Batches
- Managing Scanned Documents
- Configuring the Client for Scanning
- Overview
- System Settings
- Setting and Changing the Administrator Password
- Entering and Exiting the System Settings Mode
- Changing Settings in System Settings Mode
- Common Settings
- Copy Mode Settings
- Network Settings
- Scan Mode Settings
- Auditron Administration
- Loading Paper
- Machine Specifications
- Finisher (Optional Accessory)
- Ordering Consumables
- Cleaning the DADF and Document Glass
- Cleaning the ROS Window
- Changing Toner Cartridges
- Changing Staple Cartridges
- Changing the Fuser
- Changing the Waste Toner Container
- Changing Drum Cartridges
- Paper Jam Clearance
- Document Jams
- Stapler Faults
- Resolving Hardware Problems
- Resolving Programming Problems
- Resolving Processor Problems
- Resolving Output Problems using Basic Copying, Added Features, and Image Quality Tabs
- Calling for Service
- Fault Codes
1–62
Xerox DocuColor 3535 Printer/Copier
1 On the Output Format tab select Repeat Image.
2 Select the desired option:
• Off
• Auto Repeat
• Variable Repeat
• Press the up arrow to increase the number of images to
print in a column, or press the down arrow to decrease the
number. The range is from 1 through 33.
• Press the up arrow to increase the number of images to
print in a row, or press the down arrow to decrease the
number. The range is from 1 through 23.
3 For Auto Repeat and Variable Repeat select the Image Layout for
the output copy.
• Even: Centers all the images on the output copy.
• Bias: Places the images one after the other on the output
copy.
4 Select Start to make copies or Save to select additional features.
NOTE:Repeat Image cannot be used with the following features:
Auto Paper selection, Multiple Up, Bound Originals, Poster, Book
Duplex, Covers, and Booklet Creation.