- Hewlett-Packard Network Card User Manual

Connecting to a Windows NT Server 4.0

Windows 95 SR2

Connecting to a Windows NT Server 4.0

Windows 95 SR2 Requirements

• HP Vectra with Plug and Play enabled, running Windows 95 SR2.

• 3COM Etherlink 3C905 Ethernet card and drivers disk ver 2.1.

• Vectra VL8 Driver Name: OEMSETUP.INF Size: 49.3KB Date: 12/1/97

• Vectra VL7 Driver Name: El90X.SYS Size: 45KB Date: 3/21/97

• Microsoft Windows NT Server 4.0 machine that supports Net BEUI, TCP/

IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.

Device Configuration

• Network Driver Optimization Normal

• Full Duplex Auto Select (N-WAY)

• Boot PROM Disabled

• Media Type Auto Select (N-WAY)

Procedure

1 With the HP Vectra turned off, install the 3COM Etherlink 3C905 adapter

card into a PCI slot.

2 Connect network cable media to the 3COM 3C905 card.

Vectra VL8 Vectra VL7

I / O B a s e A d d r e s s F C C 0 h ( P C I ) F C 4 0 h ( P C I )

Interrupt Request

Level

9 (PCI) 9 (PCI)

905.bk : ch_10.fb4 Page 1 Thursday, October 22, 1998 9:51 AM