User's Manual
Left
NOTE: Refer to the illustration that most closely matches your computer.
Table 2-2 Left-side components and their descriptions
Component Description
(1) Security cable slot Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a deterrent, but
it may not prevent the computer from being mishandled or
stolen.
(2)
– or –
USB SuperSpeed powered port
– or –
USB powered port
Connects and supplies power to a USB device, such as a cell
phone, camera, activity tracker, optical drive, or smartwatch,
and provides high-speed data transfer.
– or –
Connects and supplies power to a USB device, such as a cell
phone, camera, activity tracker, optical drive, or smartwatch,
and provides data transfer.
(3) Vent Enables airow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal for
the internal fan to cycle on and o during routine operation.
(4) Memory card reader Reads optional memory cards that store, manage, share, or
access information.
To insert a card:
1. Hold the card label-side up, with the connectors facing the
computer.
2. Insert the card into the memory card reader, and then
press in on the card until it is rmly seated.
To remove a card:
▲ Press in on the card, and then remove it from the memory
card reader.
(5) Drive light ● Blinking white: The hard drive is being accessed.
● Amber: HP 3D DriveGuard has temporarily parked the hard
drive.
NOTE: For more information about HP 3D DriveGuard, see
Using HP 3D DriveGuard (select products only) on page 52.
Left 5