Operating System Software Instruction Manual

NOTE: When creating additional groups, if you select a server other than the server selected
during the first instance of group creation, you create a bidirectional Remote Copy relationship
where each storage server is both the primary and backup servers to the other.
5. Click Next.
Virtual Volumes
1. Select a Remote Copy group from the Group list.
2. Under the Source Volume on list, select a virtual volume.
3. Under the Backup Volume on list:
a. Select either Existing or New.
b. If you selected Existing, select a backup virtual volume.
c. If you selected New:
i. Name - Enter a name for the backup virtual volume.
ii. CPG under User CPG - Select a CPG from which the volume's user space is allocated.
iii. CPG under Copy CPG - Select a CPG from which the volume's copy space is allocated.
iv. (Optional) In the Allocation Warning and Allocation Limit text boxes under User CPG
and Copy CPG, enter the appropriate information. You must check the Enabled
checkbox if you want you use these options.
NOTE: When selecting volumes, you can filter the lists by clicking the down arrow and
selecting Virtual Volumes, Provisioning, and Virtual Size. To clear the filter, click Clear.
NOTE: If an RW snapshot is added to the group all RW of the same volume family is
removed. The base parent is also removed.
4. Click Add.
5. (Optional) Repeat steps 1 through 4 to add additional virtual volumes to your Remote Copy
group(s).
6. Click Next to go to the Summary page, or click Finish to complete the wizard.
Summary
Review your settings, then click Finish to complete the wizard.
Configuring 1-to-N Remote Copy
NOTE: HP 3PAR Remote Copy Software requires an HP 3PAR Remote Copy license. For more
information about the license, see the HP 3PAR OS Concepts Guide.
In a 1-to-N Remote Copy relationship, a single primary (source) system uses multiple systems as
backup systems. 1-to-N Remote Copy configurations can operate in either a combination of
unidirectional and bidirectional (for a single Remote Copy group pair), or in complete unidirectional
functionality. For the current release, a 1-to-N Remote Copy configuration can have a maximum
of two backup systems.
NOTE: In order to configure 1-to-N Remote Copy, you must have at least two available systems
with configured Remote Copy ports.
To configure 1-to-N Remote Copy:
1. In the Manager Pane, select Remote Copy.
2. In the Common Actions panel, click New Configuration.
The New Remote Copy Configuration wizard appears.
Configuring Remote Copy 209