- Hewlett-Packard Network Router User Manual

Rgetdn: Displaying the DECnet Router Level 1
Routing Table
Use NCL’s Rgetdn command to format and display the DEC net router
level 1 (node or intra-area) routing table for a local or remote HP router.
Syntax
rgetdn [X.X.X.X] [community]
[X.X.X.X] (optional) is the IP address of the local or remote
router in dotted decimal notation. If you omit this field, an IP
address on the local router will be used.
[community](optional) is the name of the community that
grants access to that node. If you omit the name, public is used.
If you include a name, the IP address must also be included.
Example
rgetdn 15.2.1.94
Displays the DEC net router intra-area routing table for the node
15.2.1.94:
Dst Cst Hop Next
Hop
IF
10000
215122
44141
The fields in the table are as follows:
Dst lists the destination node number.
Cst contains the circuit cost to Dst.
Hop lists the number of router hops to Dst.
Next Hop lists the DECnet node number of the next hop router.
IF lists the number the router assigned to the network interface for
Next Hop.
Using the Network Control Language
Accessing Bridging and Routing Tables
16-62