Reference Guide

3-256 Full Command and Function Reference
Access: !Ø OPERATIONS LL TRAN ( Ø is the left-shift of the 5key).
Input/Output:
Level 1/Argument 1 Level 1/Item 1
[[ matrix ]]
→
[[ matrix ]]
transpose
'name'
→
See also: CONJ, TRN
TRANSIO
Type: Command
Description: I/O Translation Command: Specifies the character translation option. These translations affect
only ASCII Kermit transfers and files printed to the serial port.
Legal values for n are as follows:
n Effect
0 No translation
1 Translate character 10 (line feed only) to /from characters 10 and 13 (line feed
with carriage return, the Kermit protocol) (the default value)
2 Translate characters 128 through 159 (80 through 9F hexadecimal)
3 Translate all characters (128 through 255)
Access: …µ TRANSIO
Input/Output:
Level 1/Argument 1 Level 1/Item 1
n
option
→
See also: BAUD, CKSM, PARITY
TRIG
Type: Command
Description: Converts complex logarithmic and exponential subexpressions into their equivalent trigonometric
expressions. It also simplifies trigonometric expressions by using:
xsin( )
2
xcos( )
2
+ 1=
Access: P TRIG , Trigonometry, …ÑLL
Input: A complex expression with logarithmic and/or exponential terms, or a trigonometric expression.
Output: The transformed expression.
Flags: Exact mode must be set (flag –105 clear).
Numeric mode must not be set (flag –3 clear).
Radians mode must be set (flag –17 set).
Prefers cosine terms if “prefer cos” is selected (flag –116 clear), prefers sine terms if flag –116 is
set.
Must be in Complex mode (flag –103 set) if a complex expression is being simplified.
Example: Express the following in trigonometric terms:
x
i
+
(
)
ln
Command: TRIG(LN(X+i))