Reference Guide

Full Command and Function Reference 3-87
Access: !´L FFT FFT ( ´ is the left-shift of the Pkey).
Input/Output:
Level 1/Argument 1 Level 1/Item 1
[ array ]
1
→
[ array ]
2
See also: IFFT
FILER
Type: Command
Description: Opens File Manager.
Access: !¡ ( ¡ is the left-shift of the Gkey).
…µ FILER
Input/Output: None
FINDALARM
Type: Command
Description: Find Alarm Command: Returns the alarm index n
index
of the first alarm due after the specified
time.
If the input is a real number date, FINDALARM returns the index of the first alarm due after
12:00 AM on that date. If the input is a list { date time }, it returns the index of the first alarm due
after that date and time. If the input is the real number 0, FINDALARM returns the first past-due
alarm. For any of the three arguments, FINDALARM returns 0 if no alarm is found.
Access: …Ó TOOLS ALRM FINDALARM ( Ó is the right-shift of the 9 key).
…&9 ALRM FINDALARM
!°LL TIME ALRM FINDALARM ( °is the left-shift of the Nkey).
Flags: Date Format (–42)
Input/Output:
Level 1/Argument 1 Level 1/Item 1
date
→
n
index
{ date time }
→
n
index
0
→
n
index
See also: DELALARM, RCLALARM, STOALARM
FINISH
Type: Command
Description: Finish Server Mode Command: Terminates Kermit Server mode in a device connected to the
calculator.
FINISH is used by a local Kermit device to tell a server Kermit (connected via the serial port or
the IR port) to exit Server mode.
Access: …µ FINISH
Flags: I/O Device flag (–33), I/O Messages (–39), I/O Device for Wire (–78)
Input/Output: None
See also: BAUD, CKSM, KGET, PARITY, PKT, RECN, RECV, SEND, SERVER
FIX
Type: Command
Description: Fix Mode Command: Sets the number display format to fix mode, which rounds the display to n
decimal places.