QuickSpecs HP ProLiant DL180 Generation 6 Overview Front View: 1. Access panel 2. Front LED Indicators 3. Power on/off 4. Optional DVD-RW or DVD-ROM drive 5. Front USB Ports (2) 6. Non-Hot Plug Non Redundant fans (4 fans) 7. Air Baffle 8. PCI Cage 9. System Board Rear 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
QuickSpecs HP ProLiant DL180 Generation 6 Overview NOTE: Four (4), eight (8) and twelve (12) hard drives models are supported standard via BTO. Eight (8) and twelve (12) hard drive model support requires the addition of a Smart Array or HBA controller. Hot Plug and SAS functionality require the addition of a Smart Array or HBA controller.
QuickSpecs HP ProLiant DL180 Generation 6 Overview Tool-less access to all system components for easy in rack serviceability Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement Warranty: This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners.
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section. Processor One of the following depending on Model Quad-Core Processors Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features Memory Type DDR3 Registered (RDIMM) or Unbuffered (UDIMM) Standard 4 GB (2 x 2 GB) 6 GB (3 x 2 GB) 12 GB (6 x 2 GB) Maximum (RDIMM) 96 GB (12 x 8 GB) Maximum (UDIMM) 24 GB (12 x2 GB) NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features Storage Controller 4HDD Models HP Embedded SATA RAID Controller (integrated into the south-bridge) supporting SW RAID 0,1,10 NOTE: Transfer rate up to 3.0 Gb/s SATA. HP Smart Array B110i SATA RAID NOTE: To enable RAID on Embedded SATA, use the HP Smart Array B110i SATA Raid controller, To enable use of the B110i, enter the ROM based setup utility(RBSU). The option for enabling RAID can be found in the Advanced section of the RBSU.
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features Interfaces Parallel None Network RJ-45 (Ethernet) 2 10/100/1000 NIC ports (plus 1 dedicated for the HP ProLiant Lights Out 100i Remote Management) Serial 1 Pointing Device (Mouse) 0 (via USB only) Graphics 1 Keyboard 0 (via USB only) USB 5 total ports: (2) front, (2) rear, (1) optional internal NOTE: In order to connect a USB device internally, the internal USB Cable G6 Kit must be used (536769-B21) NOTE: Please see the following UR
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features Core Infrastructure Management HP Insight Control (ICE) suites HP Insight Control suite for Linux (ICE-LX), as a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, monitor, remote control, and optimize your IT infrastructure through a single, simple management console.
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features Server Power Cords One 6' Highline (IEC-IEC) power cord ships standard NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21).
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features System Fans 4 system fans ship standard; Non-hot plug, Non-redundant NOTE: Redundant fan kit (P/N 516009-B21) available for purchase.
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features Factory Express Portfolio HP Factory Express offers configuration, customization, integration and deployment services for HP servers for Servers and Storageand storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.
QuickSpecs HP ProLiant DL180 Generation 6 HPC Interconnects NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL165 G6 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools.
QuickSpecs HP ProLiant DL180 Generation 6 Models Four Drive Serial ATA (SATA) Models NOTE: Upgrading from 4 Non-Hot Plug SATA hard drives to 4 Hot Plug SATA/SAS hard drives requires the addition of a storage controller and one Internal mini-SAS cable (496013-B21). NOTE: Upgrading to 8 Hot Plug SATA/SAS hard drives requires the addition of a HP 2U G6 8HDD LFF DL18X KIT (506924-B21), storage controller (Smart Array P410/256MB recommended), and two Internal SATA/SAS cables (mini-SAS cable (496013-B21).
QuickSpecs HP ProLiant DL180 Generation 6 Models Twelve Drive Serial ATA (SATA) Models NOTE: Internal Storage expandable to 14 SAS/SATA drives with 2 Rear Drive Option Kit (488234-B21) HP DL180G6 E5540 6x2GB 12LFF US 487507-xx1 Processor One of the following depending on model (2) Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2) Intel® Xeon® Processor E5520 (2.
QuickSpecs HP ProLiant DL180 Generation 6 Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard models listed above.
QuickSpecs HP ProLiant DL180 Generation 6 Configuration Information - Factory Integrated Models Memory Registered RDIMMs HP 2GB 2Rx8 PC3-10600R-9 Kit 500656-B21 HP 4GB 2Rx4 PC3-10600R-9 Kit 500658-B21 HP 4GB 4Rx8 PC3-8500R-7 LP Kit 500660-B21 HP 8GB 2Rx4 PC3-8500R-7 Kit 516423-B21 Unregistered with ECC UDIMMs HP 1GB 1Rx8 PC3-10600E-9 Kit 500668-B21 HP 2GB 2Rx8 PC3-10600E-9 Kit 500670-B21 NOTE: All DDR3 memory option kits consist of one DIMM per kit.
QuickSpecs HP ProLiant DL180 Generation 6 Configuration Information - Factory Integrated Models Step 3: Choose Additional Factory Integratable Options (only one from each list unless otherwise noted) Rear DVD Kit HP DL180G6 Rear DVD Cage Kit NOTE: The x16 low profile slot is not available when this option is configured.
QuickSpecs HP ProLiant DL180 Generation 6 Core Options NOTE: Some options may not be available for factory integration. Please contact an HP sales representative for additional information. Unique Options Processor HP DL180G6 Redundant Fan Kit 516009-B21 HP Dedicated Management Port Kit 516006-B21 HP Internal USB Cable G6 Kit NOTE: This option required to connect a USB device internally.
QuickSpecs HP ProLiant DL180 Generation 6 Core Options Memory Registered RDIMMs HP 2GB 2Rx8 PC3-10600R-9 Kit 500656-B21 HP 4GB 2Rx4 PC3-10600R-9 Kit 500658-B21 HP 4GB 4Rx8 PC3-8500R-7 LP Kit 500660-B21 HP 8GB 2Rx4 PC3-8500R-7 Kit 516423-B21 Unregistered with ECC UDIMMs HP 1GB 1Rx8 PC3-10600E-9 Kit 500668-B21 HP 2GB 2Rx8 PC3-10600E-9 Kit 500670-B21 NOTE: All DDR3 memory option kits consist of one DIMM per kit.
QuickSpecs HP ProLiant DL180 Generation 6 Core Options NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html (Worldwide) NOTE: If selecting more than 4 hard drives or if using SAS hard drives, a Smart Array controller and two SAS/SATA cables (P/N 464830-B21) are required. SAS Hot Plug SFF Midline (MDL) Drives HP 500GB 6G SAS 7.2K SFF DP MDL HDD 507610-B21 SAS Hot Plug 3.
QuickSpecs HP ProLiant DL180 Generation 6 Additional Options Server Management HP Lights-Out 100i Advanced Pack Stand Alone Software HP LO100i Advanced Pack, No Media 1-Server License including 1 year of 24x7 Products Technical Support and Updates NOTE: For additional License Kits please see the Lights-Out 100i Advanced QuickSpecs at: www.hp.com/go/lo100.
QuickSpecs HP ProLiant DL180 Generation 6 Additional Options Storage Controllers SAS Controllers HP Smart Array P800 HP Smart Array P800/512 BBWC Controller 381513-B21 NOTE: The HP Smart Array P800 controller provides support for external storage on the DL180G6 server. Local storage is supported on the DL180 using either the P212 or P410 controllers.
QuickSpecs HP ProLiant DL180 Generation 6 Additional Options HPC Specific Options HP IB 4X DDR Conn-X PCI-e G2 Dual Port HCA 483514-B21 HP IB 4X DDR PCI-e DUAL PORT HCA 448397-B21 HP IB 4X QDR PCI-e G2 Dual Port HCA 517721-B21 NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html Tape Storage NOTE: For the complete listing of Tape Drive offerings, please see: http://www.hp.
QuickSpecs HP ProLiant DL180 Generation 6 Additional Options HP StorageWorks MSL4048 1 LTO-3 Ultrium 920 SAS Drive Library AH560A NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://www.hp.com/go/automation needed to create a complete solution; reference current compatibility information at: http://www.hp.com/go/ebs. Disk-Based Backup RDX Removable Disk Backup HP StorageWorks RDX500 External Removable Disk Backup System NOTE: 500GB of Disk Storage.
QuickSpecs HP ProLiant DL180 Generation 6 Additional Options HP StorageWorks Modular Smart Array MSA SAN Storage Arrays HP StorageWorks 50 Modular Smart Array NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12245_div/12245_div.html (Worldwide) 364430-B21 HP StorageWorks MSA60 Array NOTE: Please see the QuickSpecs for additional options and configuration information at: http://h18000.www1.hp.
QuickSpecs HP ProLiant DL180 Generation 6 Additional Options HP Rack Series HP Rack 10000 G2 Series (Carbon/Graphite Metallic) 10642 G2 (42U) Rack Cabinet 1200mm Deep - Shock Pallet AF034A 10642 G2 (42U) Rack Cabinet 1200mm Deep - Pallet AF038A 10647 G2 (47U) Rack Cabinet 1200mm Deep - Shock Pallet AF044A 10647 G2 (47U) Rack Cabinet 1200mm Deep - Pallet AF045A NOTE: It is mandatory to use a shock pallet when shipping racks with equipment installed.
QuickSpecs HP ProLiant DL180 Generation 6 Additional Options USB Options USB 1.
QuickSpecs HP ProLiant DL180 Generation 6 Memory NOTE: Memory configurations listed do not apply to "Factory Integrated Models". HP ProLiant DL180 G6 Standard Memory (depending on model) 4 GB (2 x 2 GB) PC3-10600E Unbuffered memory, with Advanced ECC Capabilities Memory installed. 6 GB (3 x 2 GB) PC3-10600E Unbuffered memory, with Advanced ECC Capabilities Memory installed. 12 GB (6 x 2 GB) PC3-10600R Registered memory, with Advanced ECC Capabilities Memory installed.
QuickSpecs HP ProLiant DL180 Generation 6 Memory DIMM Type -> Registered DIMMS (RDIMMs) DIMM Rank -> DIMM Capacity -> DIMM Native Speed (MHz) -> 2GB 1333 Dual Rank (2R) 4GB 8GB 1333 1066 8GB 1333 Unbuffered with ECC DIMMs (UDIMMs) Quad Rank Single Rank Dual Rank (4R) (1R) (2R) 4GB 1GB 2GB 1066 1333 1333 SLOTS THAT CAN BE POPULATED 12 slot servers 12 12 12 12 12 12 12 MAXIMUM CAPACITY (GB) 12 slot servers 48 96 96 48 12 24 24 POPULATED DIMM SPEED (MHz) 1 DIMM Per Channel 1333 1333 106
QuickSpecs HP ProLiant DL180 Generation 6 Memory Standard memory configuration (1 CPU model) 6GB, consisting of three (3) 2GB dual-rank PC3-10600 RDIMMs Chnl 1 slot # 1 2 CPU1 population order D: empty A: 2GB DIMM slot # 1 2 CPU2 population order D: empty A: empty Chnl 1 Chnl 2 3 4 E: empty B: 2GB DIMM 3 4 E: empty B: empty Chnl 2 Chnl 3 5 6 F: empty C: 2GB DIMM 5 6 F: empty C: empty Chnl 3 Standard memory plus optional memory (1 CPU model) 30GB, consisting of three (3) 2GB RDIMMs plus
QuickSpecs HP ProLiant DL180 Generation 6 Memory UDIMM maximum configuration (1 CPU model) 12GB, consisting of six (6) 2GB dual-rank PC3-10600 UDIMMs Chnl 1 slot # 1 2 CPU1 population order D: 2GB DIMM A: 2GB DIMM slot # 1 2 CPU2 population order D: empty A: empty Chnl 1 Chnl 2 3 4 E: 2GB DIMM B: 2GB DIMM 3 4 E: empty B: empty Chnl 2 Chnl 3 5 6 F: 2GB DIMM C: 2GB DIMM 5 6 F: empty C: empty Chnl 3 Standard memory replaced with optional memory (2 CPU model) RDIMM maximum configuration 96G
QuickSpecs HP ProLiant DL180 Generation 6 Memory 4GB = 4096MB 8GB = 8192MB For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.
QuickSpecs HP ProLiant DL180 Generation 6 Storage 8 Drive Cage with DVD-Drive bay 1-8 9 Eight 3.5" Hot Plug SAS/SATA Hard Drive Bays DVD-ROM, DVD RW 12 Drive Cage 1-12 Twelve 3.5" Hot Plug SAS/SATA Hard Drive Bays 13-14 Two Rear 3.
QuickSpecs HP ProLiant DL180 Generation 6 Storage drive cage + Rear Drive Cage HP Smart Array P212/256 MB Controller NOTE: Smart Array P212 Controllers recommended. HP Smart Array P800/512 BBWC Controller HP Smart Array P410/256 MB Controller HP Smart Array P410/512 MB BBWC Controller SATA Hot Plug 3.5" Entry (ETY) Drives Quantity Supported 160GB 3G 7.
QuickSpecs HP ProLiant DL180 Generation 6 Storage 400GB 3G 10K 450GB 3G 15K 300GB 3G 15K 146GB 3G 15K 72GB 3G 15K Up to 8 with 8 drive cage 1-8 Up to 14 with 12 drive cage + Rear Drive Cage 1-12 HP Smart Array P212/Zero Memory Controller HP Smart Array P212/256 MB Controller HP Smart Array P800/512 BBWC Controller HP Smart Array P410/256 MB Controller HP Smart Array P410/512 MB BBWC Controller External Storage Quantity Supported Position Supported 50 Modular Smart Array Up to 4 External HP Smar
QuickSpecs HP ProLiant DL180 Generation 6 Storage Tape Drives, External DAT 160 SAS LTO-2 Ultrium 448 SAS LTO-3 Ultrium 920 SAS LT0-4 Ultrium 1760 SAS LTO-4 Ultrium 1840 SAS 1U Rack-Mount Kit 3U Rack-Mount Kit HP StorageWorks SCSI External Tape Automation, External DAT 72x10 Autoloader 1/8 G2 Tape Autoloader MSL2024 MSL4048 HP SC11Xe Host Bus Adapter HP StorageWorks SAS External Tape Automation, External 1/8 G2 Autoloader MSL2024 MSL4048 HP Smart Array P212/Zero Memory Controller HP StorageWorks Fibre
QuickSpecs HP ProLiant DL180 Generation 6 Power Specifications HP 460W Power Supply Part Number - AC 460W PSU 503296-B21 Input Voltage Range (Vrms) 100 to 240 Frequency Range (Nominal) (Hz) 50/60 Nominal Input Voltage (Vrms) 100 Maximum Rated Output Wattage 460 Nominal Input Current (A rms) 5.5 Max Rated Input Wattage Rating 526 (Watts) Max. Rated VA (Volt-Amp) 548 Efficiency (%) at Max. Rated Output 87.5 Wattage Power Factor 0.97 Leakage Current (mA) 0.42 Max. Inrush Current (A peak) 30 Max.
QuickSpecs HP ProLiant DL180 Generation 6 Technical Specifications System Unit Dimensions (H x W x D) 3.45" x 17.64" x 28.23" in (8.76 x 44.80 x 71.71 cm) (with bezel) Weight (approximate) Input Requirements (per power supply) Maximum (all hard drives, power supplies, and processors installed) 45.0 lb (16.80 kg) Minimum (one hard drive, power supply, and processor installed) 32.0 lb (11.94 kg) Rated Line Voltage 90 -- 132 VAC, 180 - 264 V Rated Input Current 460 Watt 7.1 A (at 120 VAC) 3.
QuickSpecs HP ProLiant DL180 Generation 6 Technical Specifications System performance may be reduced if operating with a fan fault or above 30°C (86°F). Relative Humidity (non-condensing) Altitude Acoustic Noise Non-operating -30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr). Operating 10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing. Non-operating 5 to 95% relative humidity (Rh), 38.7°C (101.
QuickSpecs HP ProLiant DL180 Generation 6 Technical Specifications HP 160GB 3G SATA 7.2K 3.5" ETY HDD 458945-B21 160GB 7,200 rpm Capacity 160,041MB Height 1.04 in (26.4 mm) Width 4.36 in (110.7 mm) Depth 7.25 in (184.2 mm) Interface Serial ATA Transfer Rate (Maximum) 3Gb/s Native Command Queuing Supported Seek Time (typical reads, including settling) Single Track 2.0 ms Average <11 ms Full-Stroke 23.
QuickSpecs HP ProLiant DL180 Generation 6 Technical Specifications Smart Array P410/410iDisk Drive and Enclosure3G SAS (Serial Attached SCSI) Controller Interface 1.5G SATA (Serial ATA) SAS Connectors 2 internal (Mini-SAS) x8 wide port connectors Cache Memory Speed DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s maximum bandwidth. Server Interface x8 2.5G PCIe 2.0 provides 2GB/s maximum bandwidth SAS Speed x8 3G SAS provides 2.